Wrapped Silicone Fuel & Oil Hose 90 Degree Elbow 32mm ID
Crankcase Breather & Catch Can | 150mm Legs | Right-Angle Turns | Secure With Clamps
Brand: HOSES UK- 32mm (1 1/4") ID
- 41mm OD
- 4.5mm wall
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- HOSES UK
- Material
- Silicone Rubber
- Colour
- Black
- Inside diameter
- 32mm (1 1/4")
- Outside diameter
- 41mm
- Wall thickness
- 4.5mm
- Length
- 300mm
- Maximum pressure
- 15.5 bar
About this item
- 📏 32mm (1 1/4") INTERNAL DIAMETER (ID) WRAPPED FUEL & OIL HOSE - 32mm bore, 90 degree elbow with 150mm legs. Match the ID to the outside of the pipe or spigot it pushes over.
- 🔧 MADE FOR FUEL & OIL VAPOUR - crankcase breathers, PCV and catch-can lines, oil-mist and vapour pipes on cars, vans, motorbikes and track cars.
- 🌡️ SILICONE OUTER, BUILT FOR THE ENGINE BAY - flexible, heat-tolerant silicone construction for hot engine-bay breather and vapour routing.
- 🛡️ CHECK THE APPLICATION - use for breather, vapour and low-pressure oil lines; secure every joint with a clamp and route it clear of exhaust parts.
- ⚫ TEXTURED WRAPPED FINISH - black wrapped silicone outer. Secure each end with a correctly sized hose clip (not included).
Product description
Wrapped Silicone Fuel & Oil Hose 90 Degree Elbow 32mm ID
A wrapped silicone fuel & oil hose for crankcase breathers, PCV and catch-can lines, oil-mist and vapour pipes. The silicone construction stays flexible through engine heat while the line handles fuel and oil vapour.
- 32mm internal diameter
- Textured wrapped black finish
Fitting: clean the pipe ends, push the hose fully on, and secure each end with a correctly sized hose clip or clamp.
Product details
| Brand | HOSES UK |
|---|---|
| Material | Silicone Rubber |
| Colour | Black |
| Inside diameter | 32mm (1 1/4") |
| Outside diameter | 41mm |
| Wall thickness | 4.5mm |
| Length | 300mm |
| Maximum pressure | 15.5 bar |
| Shape | Circular |
| Manufacturer | HOSES UK |