3mm Silicone Vacuum Tube Black, 7mm OD, 1m Engine Vacuum Line Pipe
60°C to +180°C (+200°C Peak) | 3.3ft Repairs | 2mm Wall, Approx 28g | Stealth OEM Look | Workshop & DIY Ready
Brand: AP Automotive- 3mm ID
- 7mm OD
- 2mm wall
- -60°C TO +180°C
Ask about this product
£775
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AP Automotive
- Material
- Silicone
- Colour
- Black
- Inside diameter
- 3mm
- Outside diameter
- 7mm
- Wall thickness
- 2mm
- Length
- 1m
- Temperature range
- -60°C TO +180°C
About this item
- 📏 3MM ID x 7MM OD, 1M LENGTH – 3mm (1/8") internal diameter, 7mm (9/32") outside diameter and 2mm wall, supplied as one continuous 1 metre length (3.3ft, approx. 28g). Choose the ID that matches the spigot you are fitting to.
- 🔧 ENGINE VACUUM LINE – for cars, vans, motorbikes, boats and machinery. The 3mm bore suits MAP sensor and boost-control signal lines, wastegate actuator, dump valve and fuel-pressure-regulator vacuum references; also ideal for workshop air lines and low-pressure water transfer.
- 🌡️ -60°C TO +180°C RATED – continuous operating range -60°C to +180°C with peaks to +200°C. Extruded VMQ silicone to SAE J20 R3 grade stays flexible from cold starts to full engine-bay heat and will not harden, crack or perish like rubber.
- 🛠️ UNREINFORCED, EASY TO ROUTE – a single wall of silicone with no fabric ply, so it bends round tight routes and seals well on push-on spigots. Made for vacuum, signal, air and low-pressure water lines – not for pressurised coolant, fuel or oil; very tight bends can kink.
- ⚫ BLACK SILICONE – black finish that blends in with OEM pipework. Trim square with a sharp blade and secure with mini hose clips sized for the 7mm outside diameter.
Product details
| Brand | AP Automotive |
|---|---|
| Material | Silicone |
| Colour | Black |
| Inside diameter | 3mm |
| Outside diameter | 7mm |
| Wall thickness | 2mm |
| Length | 1m |
| Temperature range | -60°C TO +180°C |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | AP Automotive |
£7.75
Black / 1m / 3mm