8mm Straight Barbed Hose Joiner Inline Pipe Connector Black
ABS, made in the UK | 75mm long, ribbed grip both ends | -20°C to +105°C | 2mm wall | Matte finish
Brand: AP Automotive- 8mm ID
- 8mm OD
- 2mm wall
- -20°C to +105°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AP Automotive
- Material
- Plastic
- Colour
- Black
- Inside diameter
- 8mm
- Outside diameter
- 8mm
- Wall thickness
- 2mm
- Length
- 75mm
- Temperature range
- -20°C to +105°C
About this item
- 🔗 JOINS TWO 8mm HOSES - connects two hoses with a 8mm (5/16 inch) internal diameter end to end in a straight line, to repair a split hose or extend a run. Push each end into its hose up to the centre collar and secure with hose clips.
- 📏 BARBED BOTH ENDS - about 75mm (3 inch) long, with identical ribbed barbs on each end that grip the inside of the hose, and a raised centre collar so each hose stops at the right depth. No adhesive or sealant needed.
- 💪 TOUGH ABS PLASTIC - made in the UK from rigid, lightweight 3D-printed ABS with a matte finish and a 2mm wall; resists cracking, impact and UV for outdoor use. Rated -20°C to +105°C; not for high-temperature lines.
- 💧 PONDS, GARDENS & MORE - pond pump and filter hose, water features, garden irrigation and hose repairs, water butts and water transfer, aquariums, automotive breather and vacuum lines, and workshop hoses.
- ⚫ THIS LISTING: 1 x 8mm black straight joiner - fits hoses with a 8mm internal diameter. 31 sizes from 8mm to 102mm in black, blue, red and white, each in packs of 1-10, 20, 30, 40 and 50.
Product description
Straight Barbed Hose Joiner - joins two hoses of the same size end to end in a straight line.
- Barbed both ends - identical ribbed barbs grip the inside of each hose.
- Centre collar - each hose pushes on up to the stop.
- Tough ABS - rigid, lightweight, 3D printed, matte finish, 2mm wall, made in the UK.
- Length - about 75mm (3 inch).
- Temperature - -20°C to +105°C.
- Colours - black, blue, red and white.
This listing: 1 x 8mm (5/16 inch) black straight joiner. Each end fits a hose with a 8mm internal diameter.
Sizes: 31 sizes from 8mm to 102mm, each in packs of 1-10, 20, 30, 40 and 50.
Uses: pond pump and filter hose, water features, garden irrigation and hose repairs, water butts and water transfer, aquariums, automotive breather and vacuum lines, and workshop hoses.
Fitting: measure the internal diameter of the hose, push each end of the joiner fully in up to the collar and secure each hose with a clip. Hose clips are sold separately.
Product details
| Brand | AP Automotive |
|---|---|
| Material | Plastic |
| Colour | Black |
| Inside diameter | 8mm |
| Outside diameter | 8mm |
| Wall thickness | 2mm |
| Length | 75mm |
| Temperature range | -20°C to +105°C |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | ap automotive |