5mm (3/16") Clear Braided PVC Hose, Reinforced Air & Water Pipe 1m
10°C to +65°C (Peak 70°C) | 3.3ft Offcut for Repairs | Workshop Compressor Lines | 9mm Outside Diameter | 2mm Wall
Brand: AP Automotive- 5mm ID
- 9mm OD
- 2mm wall
- -10°C to +65°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AP Automotive
- Material
- Polyvinyl Chloride (PVC)
- Colour
- Clear
- Inside diameter
- 5mm
- Outside diameter
- 9mm
- Wall thickness
- 2mm
- Length
- 1m
- Temperature range
- -10°C to +65°C
- Maximum pressure
- 10 bar
About this item
- 📏 5mm (3/16") BORE x 1M LONG - 5mm (3/16") Inside Diameter x 9mm Outside Diameter with a 2mm wall, 1 metre (3.3 ft) length. Fits 5mm / 3/16" hose tails, barbs and spigots.
- 💨 AIR, WATER & LIGHT CHEMICALS - A clear, polyester-braided PVC hose for air lines, water transfer and light chemical duties. At 5mm bore it suits aquariums, air pumps, drinks and lab lines, small fountain pumps and workshop air lines and workshop compressor lines.
- 🔍 CLEAR PVC WITH TRIPLE POLYESTER BRAID - Soft PVC inner and outer layers with a triple polyester yarn reinforcement resist kinking and stretching under pressure, and the transparent wall lets you check flow and spot blockages without disconnecting. This 1m length is a handy offcut for repairs, short joins and pump tails.
- 💪 10 BAR WORKING PRESSURE - 30 bar burst (3:1 safety margin) at 5mm bore, minimum bend radius 54mm. Rated -10°C to +65°C (peak +70°C) for indoor and outdoor use.
- 🔧 EASY TO FIT - Cuts cleanly with a sharp knife or hose cutter. Warm the end in hot water to ease it onto a tight fitting, then secure with a hose clip whose range covers 9mm. Suitable for water, air and light chemicals, plus food and drink transfer (food grade PVC).
Frequently bought together
Total price:
Product description
Clear Braided PVC Hose - 5mm (3/16") x 9mm, 1m
Flexible, transparent PVC hose with soft PVC inner and outer layers and a triple polyester yarn braid. A clear, polyester-braided PVC hose for air lines, water transfer and light chemical duties. The smooth bore keeps flow efficient and the transparent wall lets you check flow and spot blockages without disconnecting.
- ✅ This size: 5mm (3/16") Inside Diameter, 9mm Outside Diameter, 2mm wall, 1m long.
- ✅ Pressure: 10 bar working, 30 bar burst (3:1 safety margin).
- Bend radius: 54mm minimum.
- Temperature: -10°C to +65°C (peak +70°C).
- Standard: ISO 5774:2016 Type A.
- Media: water, air and light chemicals, plus food and drink transfer (food grade PVC).
Applications: Aquariums, air pumps, drinks and lab lines, small fountain pumps and workshop air lines and workshop compressor lines, plus general fluid transfer in the garden, workshop and on the farm.
Fitting: match the hose bore to your hose tail or barb (5mm / 3/16"), warm the end in hot water to ease it on, then secure with a hose clip that covers 9mm.
Also available: 5, 6, 8, 10, 12.5, 16, 19, 25, 32, 38, 51mm bores in a choice of lengths.
Product details
| Brand | AP Automotive |
|---|---|
| Material | Polyvinyl Chloride (PVC) |
| Colour | Clear |
| Inside diameter | 5mm |
| Outside diameter | 9mm |
| Wall thickness | 2mm |
| Length | 1m |
| Temperature range | -10°C to +65°C |
| Maximum pressure | 10 bar |
| Pack quantity | 1 |
| Manufacturer | AP Automotive |