Kiln Dried Paving Sand 20kg for Block Paving, Patios & Driveways
Jointing Grade | Buff Colour | Non-Staining | Free Draining | BS 7533-3
Brand: AP Automotive
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AP Automotive
- Material
- Sand
- Colour
- Buff
About this item
- 🧱 KILN DRIED JOINTING SAND - 20kg bag of dry, free-flowing sand for brushing into the joints of block paving, patios, paths and driveways. Runs to the bottom of narrow joints and locks the blocks together so they cannot rock, creep or shift
- 💧 FREE DRAINING, READY TO USE - Straight from the bag with no mixing, water or curing. Brush in on a dry day, compact, then top up. The loose sand lets rainwater drain down through the joints and sub-base, so surface water does not pool
- ✨ NON-STAINING BUFF COLOUR - Natural buff tone blends with most concrete block paving, clay pavers and patio slabs and leaves no marks on the surface. Sweep off the surplus once the joints are full
- 📐 COVERAGE PER 20KG BAG - 50mm blocks approx 7.6 m², 60mm blocks approx 5.6 m², 80mm blocks approx 4.4 m². Coverage depends on joint width and depth; allow extra when refilling empty joints on older paving
- ✅ MEETS BS 7533-3 - Medium grade (Mansil 40), sub-angular grain compliant with BS 7533-3:2005 Table D.4 for jointing block paving. Ideal for re-sanding after pressure washing, and also suits artificial grass infill
Product description
Kiln Dried Paving Sand – 20kg Bag
Dry, free-flowing jointing sand for block paving. Brush it into the gaps between blocks to lock them together, stop lateral movement and give a clean, finished look to patios, paths and driveways.
- ✅ Kiln dried, so it flows right down into narrow joints
- ✅ Free draining – water passes through the laying course and sub-base
- Non-staining buff colour that suits most paving
- Medium grade (Mansil 40) sub-angular grain
- Complies with BS 7533-3:2005 Table D.4
Coverage per 20kg bag
50mm block thickness: approx. 7.6 m²
60mm block thickness: approx. 5.6 m²
80mm block thickness: approx. 4.4 m²
How to use
Make sure the paving is dry. Spread the sand over the surface, brush it into the joints, run a plate compactor over the blocks, then brush in a second pass to fill the joints fully. Sweep off the surplus.
Uses
Block paving, patios, driveways, garden paths, paving slab joints and artificial grass infill.
Product details
| Brand | AP Automotive |
|---|---|
| Material | Sand |
| Colour | Buff |
| Pack quantity | 1 |
| Manufacturer | AP Automotive |