Wire Reinforced Silicone Hose 1m 9.5mm ID Red, Suction & Vacuum

60 to +180°C | 5mm Wall | 19.5mm Outside Diameter (OD) | 30 Bar Burst | Internal Coil Resists Collapse | Race-Style Gloss

Brand: HOSES UK
  • 9.5mm (3/8") ID
  • 19.5mm OD
  • 5mm wall

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£2595

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
HOSES UK
Material
Silicone Rubber
Colour
Red
Inside diameter
9.5mm (3/8")
Outside diameter
19.5mm
Wall thickness
5mm
Length
1m
Maximum pressure
30 bar

About this item

  • 📏 9.5mm (3/8") INTERNAL DIAMETER (ID) WIRE REINFORCED HOSE, 1 METRE - 9.5mm bore, 5mm wall and an Outside Diameter (OD) of 19.5mm, 1 metre long with a steel wire helix moulded into the wall. Match the ID to the outside of the pipe or spigot it pushes over.
  • 🔧 HOLDS ITS BORE UNDER SUCTION - the steel wire helix stops the hose collapsing on suction, vacuum and tight bends: crankcase breathers, intake and induction feeds, heater and coolant runs.
  • 🌡️ HIGH TEMPERATURE SILICONE -60 to +180°C - stays flexible in heat and cold and resists ozone, UV, coolant and weathering, so it won't harden, crack or perish like ageing rubber.
  • 🛡️ POLYESTER BRAID PLUS A STEEL WIRE HELIX REINFORCED, SAE J20 R3 - holds its shape under boost pressure and vacuum (10 bar working / 30 bar burst), with a smooth bore for clean flow.
  • 🔴 RED GLOSS FINISH - a smart red silicone part for a tidy engine bay. Secure each end with a hose clip or T-bolt clamp sized for 19.5mm Outside Diameter (OD) (not included).

Product description

Wire Reinforced Silicone Hose 1m 9.5mm ID Red, Suction & Vacuum

A wire reinforced silicone hose, 1 metre in red silicone for vacuum lines, breathers, sensor and boost-control pipes, washer and overflow lines. It stays sealed and flexible through constant heat cycles and engine vibration, and outlasts rubber hose.

  • 9.5mm internal diameter, 5mm wall, Outside Diameter (OD) 19.5mm
  • polyester braid plus a steel wire helix reinforcement, SAE J20 R3, 10 bar working / 30 bar burst
  • Operating temperature -60 to +180°C

Fitting: clean the pipe ends, push the hose fully on, and secure each end with a correctly sized hose clip or clamp.

Product details

BrandHOSES UK
MaterialSilicone Rubber
ColourRed
Inside diameter9.5mm (3/8")
Outside diameter19.5mm
Wall thickness5mm
Length1m
Maximum pressure30 bar
ShapeCircular
Pack quantity1
ManufacturerHOSES UK

Products related to this item