Wire Reinforced Silicone Hose 1m 9.5mm ID Blue, Suction & Vacuum
60 to +180°C | 5mm Wall | 19.5mm Outside Diameter (OD) | 30 Bar Burst | Internal Coil Resists Collapse | Show-Car Gloss
Brand: HOSES UK- 9.5mm (3/8") ID
- 19.5mm OD
- 5mm wall
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit$26.00
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips$35.00
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers$73.00
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat$20.00
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
- Brand
- HOSES UK
- Material
- Silicone Rubber
- Colour
- Blue
- Inside diameter
- 9.5mm (3/8")
- Outside diameter
- 19.5mm
- Wall thickness
- 5mm
- Length
- 1m
- Maximum pressure
- 30 bar
About this item
- 📏 9.5mm (3/8") INTERNAL DIAMETER (ID) WIRE REINFORCED HOSE, 1 METRE - 9.5mm bore, 5mm wall and an Outside Diameter (OD) of 19.5mm, 1 metre long with a steel wire helix moulded into the wall. Match the ID to the outside of the pipe or spigot it pushes over.
- 🔧 HOLDS ITS BORE UNDER SUCTION - the steel wire helix stops the hose collapsing on suction, vacuum and tight bends: crankcase breathers, intake and induction feeds, heater and coolant runs.
- 🌡️ HIGH TEMPERATURE SILICONE -60 to +180°C - stays flexible in heat and cold and resists ozone, UV, coolant and weathering, so it won't harden, crack or perish like ageing rubber.
- 🛡️ POLYESTER BRAID PLUS A STEEL WIRE HELIX REINFORCED, SAE J20 R3 - holds its shape under boost pressure and vacuum (10 bar working / 30 bar burst), with a smooth bore for clean flow.
- 🔵 BLUE GLOSS FINISH - a smart blue silicone part for a tidy engine bay. Secure each end with a hose clip or T-bolt clamp sized for 19.5mm Outside Diameter (OD) (not included).
Product description
Wire Reinforced Silicone Hose 1m 9.5mm ID Blue, Suction & Vacuum
A wire reinforced silicone hose, 1 metre in blue silicone for vacuum lines, breathers, sensor and boost-control pipes, washer and overflow lines. It stays sealed and flexible through constant heat cycles and engine vibration, and outlasts rubber hose.
- 9.5mm internal diameter, 5mm wall, Outside Diameter (OD) 19.5mm
- polyester braid plus a steel wire helix reinforcement, SAE J20 R3, 10 bar working / 30 bar burst
- Operating temperature -60 to +180°C
Fitting: clean the pipe ends, push the hose fully on, and secure each end with a correctly sized hose clip or clamp.
Product details
| Brand | HOSES UK |
|---|---|
| Material | Silicone Rubber |
| Colour | Blue |
| Inside diameter | 9.5mm (3/8") |
| Outside diameter | 19.5mm |
| Wall thickness | 5mm |
| Length | 1m |
| Maximum pressure | 30 bar |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | HOSES UK |