Wire Reinforced Silicone Hose 1m 48mm ID Blue, Suction & Turbo

60 to +180°C | 5mm Wall | 58mm Outside Diameter (OD) | Internal Coil Resists Collapse | Show-Car Gloss | Secure With Clamps

Brand: HOSES UK
  • 48mm (1 7/8") ID
  • 58mm OD
  • 5mm wall

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£6290

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
HOSES UK
Material
Silicone Rubber
Colour
Blue
Inside diameter
48mm (1 7/8")
Outside diameter
58mm
Wall thickness
5mm
Length
1m
Maximum pressure
21 bar

About this item

  • 📏 48mm (1 7/8") INTERNAL DIAMETER (ID) WIRE REINFORCED HOSE, 1 METRE - 48mm bore, 5mm wall and an Outside Diameter (OD) of 58mm, 1 metre long with a steel wire helix moulded into the wall. Match the ID to the outside of the pipe or spigot it pushes over.
  • 🔧 HOLDS ITS BORE UNDER SUCTION - the steel wire helix stops the hose collapsing on suction, vacuum and tight bends: crankcase breathers, intake and induction feeds, heater and coolant runs.
  • 🌡️ HIGH TEMPERATURE SILICONE -60 to +180°C - stays flexible in heat and cold and resists ozone, UV, coolant and weathering, so it won't harden, crack or perish like ageing rubber.
  • 🛡️ POLYESTER BRAID PLUS A STEEL WIRE HELIX REINFORCED, SAE J20 R3 - holds its shape under boost pressure and vacuum, with a smooth bore for clean flow.
  • 🔵 BLUE GLOSS FINISH - a smart blue silicone part for a tidy engine bay. Secure each end with a hose clip or T-bolt clamp sized for 58mm Outside Diameter (OD) (not included).

Product description

Wire Reinforced Silicone Hose 1m 48mm ID Blue, Suction & Turbo

A wire reinforced silicone hose, 1 metre in blue silicone for turbo and intercooler boost pipes, radiator hoses and intake pipework. It stays sealed and flexible through constant heat cycles and engine vibration, and outlasts rubber hose.

  • 48mm internal diameter, 5mm wall, Outside Diameter (OD) 58mm
  • polyester braid plus a steel wire helix reinforcement, SAE J20 R3
  • Operating temperature -60 to +180°C

Fitting: clean the pipe ends, push the hose fully on, and secure each end with a correctly sized hose clip or clamp.

Product details

BrandHOSES UK
MaterialSilicone Rubber
ColourBlue
Inside diameter48mm (1 7/8")
Outside diameter58mm
Wall thickness5mm
Length1m
Maximum pressure21 bar
ShapeCircular
Pack quantity1
ManufacturerHOSES UK

Products related to this item