Wire Reinforced Silicone Hose 1m 32mm ID Black, Suction & Radiator
60 to +180°C | 5mm Wall | 42mm Outside Diameter (OD) | 24 Bar Burst | Internal Coil Resists Collapse | OEM-Style Gloss
Brand: HOSES UK- 32mm (1 1/4") ID
- 42mm OD
- 5mm wall
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit$26.00
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips$35.00
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers$73.00
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat$20.00
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
- Brand
- HOSES UK
- Material
- Silicone Rubber
- Colour
- Black
- Inside diameter
- 32mm (1 1/4")
- Outside diameter
- 42mm
- Wall thickness
- 5mm
- Length
- 1m
- Maximum pressure
- 24 bar
About this item
- 📏 32mm (1 1/4") INTERNAL DIAMETER (ID) WIRE REINFORCED HOSE, 1 METRE - 32mm bore, 5mm wall and an Outside Diameter (OD) of 42mm, 1 metre long with a steel wire helix moulded into the wall. Match the ID to the outside of the pipe or spigot it pushes over.
- 🔧 HOLDS ITS BORE UNDER SUCTION - the steel wire helix stops the hose collapsing on suction, vacuum and tight bends: crankcase breathers, intake and induction feeds, heater and coolant runs.
- 🌡️ HIGH TEMPERATURE SILICONE -60 to +180°C - stays flexible in heat and cold and resists ozone, UV, coolant and weathering, so it won't harden, crack or perish like ageing rubber.
- 🛡️ POLYESTER BRAID PLUS A STEEL WIRE HELIX REINFORCED, SAE J20 R3 - holds its shape under boost pressure and vacuum (8 bar working / 24 bar burst), with a smooth bore for clean flow.
- ⚫ BLACK GLOSS FINISH - a smart black silicone part for a tidy engine bay. Secure each end with a hose clip or T-bolt clamp sized for 42mm Outside Diameter (OD) (not included).
Product description
Wire Reinforced Silicone Hose 1m 32mm ID Black, Suction & Radiator
A wire reinforced silicone hose, 1 metre in black silicone for radiator top and bottom hoses, coolant pipework and turbo pipes. It stays sealed and flexible through constant heat cycles and engine vibration, and outlasts rubber hose.
- 32mm internal diameter, 5mm wall, Outside Diameter (OD) 42mm
- polyester braid plus a steel wire helix reinforcement, SAE J20 R3, 8 bar working / 24 bar burst
- Operating temperature -60 to +180°C
Fitting: clean the pipe ends, push the hose fully on, and secure each end with a correctly sized hose clip or clamp.
Product details
| Brand | HOSES UK |
|---|---|
| Material | Silicone Rubber |
| Colour | Black |
| Inside diameter | 32mm (1 1/4") |
| Outside diameter | 42mm |
| Wall thickness | 5mm |
| Length | 1m |
| Maximum pressure | 24 bar |
| Shape | Circular |
| Manufacturer | HOSES UK |