Water Butt Connector Pipe 25mm x 50cm, Blue Corrugated Linking Hose
Links two butts or overflow to the next | Fits 25mm tails & spigots, 30mm OD | Clips sold separately | -10°C to +65°C
Brand: AutoSiliconeHoses.com- 25mm ID
- 3cm OD
- 2.6mm wall
- -10°C to +65°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- Polyvinyl Chloride (PVC)
- Colour
- Blue
- Inside diameter
- 25mm
- Outside diameter
- 3cm
- Wall thickness
- 2.6mm
- Length
- 500mm
- Temperature range
- -10°C to +65°C
- Maximum pressure
- 5 bar
About this item
- 💧 WATER BUTT LINK PIPE - one 50cm (20in) length of 25mm (1") internal diameter corrugated PVC hose, 30mm outside diameter, cut ready to link two water butts, run an overflow to the next butt or join a downpipe diverter to a butt.
- 🔧 PUSH-ON FIT - slides over 25mm (1") water butt connectors, hose tails and diverter outlets. Secure each end with a hose clip (sold separately) for a drip-free joint. Choose 25mm to match the outlets on your butts.
- 👁️ SEE THE FLOW - clear PVC wall with a solid blue rib, so you can see water moving between butts and spot leaves, silt or an airlock without taking the link apart.
- 💪 CRUSH RESISTANT, KINK FREE - a high-tensile plastic rib holds the bore open on a tight bend between two butts standing side by side, and the smooth inner wall keeps the flow steady.
- ☀️ OUTDOOR RATED - UV resistant PVC for permanent outdoor use, -10°C to +65°C (peak +70°C), working pressure 5 bar. Made to BS EN ISO 3994-2001. Not for drinking water or steam.
Product description
Blue Water Butt Connector Pipe, 25mm x 50cm - a short length of crush-resistant corrugated PVC hose for linking water butts and rain barrels, overflow runs and downpipe diverters.
- ✅ Ready length - 50cm, the gap between two butts standing side by side.
- ✅ Push-on fit - for 25mm (1") connectors and hose tails.
- See-through wall - spot blockages at a glance.
- Outdoor rated - UV resistant, -10°C to +65°C.
This listing: one 50cm length of 25mm internal diameter, 30mm outside diameter blue corrugated PVC hose. Hose clips are sold separately. Not for drinking water.
Uses: linking two or more water butts, overflow from one butt to the next, downpipe diverter to butt, butt to pump or tap, rainwater harvesting.
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | Polyvinyl Chloride (PVC) |
| Colour | Blue |
| Inside diameter | 25mm |
| Outside diameter | 3cm |
| Wall thickness | 2.6mm |
| Length | 500mm |
| Temperature range | -10°C to +65°C |
| Maximum pressure | 5 bar |
| Shape | Round |
| Pack quantity | 1 |
| Manufacturer | Auto Silicone Hoses |