Ventilation Duct 83mm x 3m Black Single-Ply Silicone with 2 Hose Clips

70°C to +310°C | Pair of 70-90mm Zinc Clamps | 9.8ft Long | Engine Room & Cabin Vents | For 83mm Spigots | +350°C Peak

Brand: AutoSiliconeHoses.com
  • 83mm ID
  • -70°C to +310°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£3395

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
AutoSiliconeHoses.com
Material
Silicone, Zinc Plated Steel
Colour
Black
Inside diameter
83mm
Length
3m
Temperature range
-70°C to +310°C

About this item

  • 📦 IN THE BOX – one 3 metre (9.8 ft) length of black single-ply silicone ducting, 83mm (3 1/4 inch) bore, plus two 70-90mm zinc plated worm drive hose clips sized to clamp it over a 83mm spigot.
  • 💨 VENTILATION & AIR TRANSFER – moves air in and out of boat engine rooms, camper and van cabins, battery boxes, cabinets and enclosures that need venting. The ducting and its clips arrive in one order, so the run can go in the day it lands.
  • 🧵 Single-ply silicone wall keeps the duct light and easy to route through tight engine bays and cabinets
  • 🌡️ Rated -70°C to +310°C continuous with short peaks to +350°C, so it stays soft and sealed on sustained hot-air duty
  • 🔩 MATCHED ZINC CLIPS – the 70-90mm zinc plated worm drive clips are chosen for 83mm-bore single-ply ducting pushed over a 83mm spigot, so they slide on and still close down tight. Push the ducting over the spigot and tighten one clip over each end.

Product description

Ventilation Duct 83mm x 3m Black Single-Ply Silicone with 2 Hose Clips

Flexible single-ply silicone ducting that moves air in and out of boat engine rooms, camper and van cabins, battery boxes, cabinets and enclosures that need venting, supplied with two zinc plated worm drive hose clips sized for it. It handles -70°C to +310°C continuously and short peaks to +350°C.

  • In the box: 1 x 3m black single-ply silicone ducting and 2 x 70-90mm zinc plated worm drive hose clips.
  • Internal bore: 83mm (3 1/4 inch)
  • Length supplied: 3m (9.8 ft)
  • Temperature rating: -70°C to +310°C (peak +350°C)
  • Colour: Black
  • Construction: single-ply silicone

Cut the 3m length to suit your run, push the ends over the spigots and tighten one of the supplied clips over each end.

Product details

BrandAutoSiliconeHoses.com
MaterialSilicone, Zinc Plated Steel
ColourBlack
Inside diameter83mm
Length3m
Temperature range-70°C to +310°C
ShapeRound
Pack quantity1
ManufacturerAuto Silicone Hoses

Products related to this item