Ventilation Duct 32mm x 3m Black 2-Ply Silicone with 2 Hose Clips

70°C to +310°C | Pair of 30-40mm Zinc Clamps | 9.8ft Long | Engine Room & Cabin Vents | 37mm OD, 2.5mm Wall | +350°C Peak

Brand: AutoSiliconeHoses.com
  • 32mm ID
  • 37mm OD
  • 2.5mm wall
  • -70°C to +310°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£3095

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
AutoSiliconeHoses.com
Material
Silicone, Coated Fibreglass, Steel Wire, Glass Fibre, Zinc Plated Steel
Colour
Black
Inside diameter
32mm
Outside diameter
37mm
Wall thickness
2.5mm
Length
3m
Temperature range
-70°C to +310°C

About this item

  • 📦 IN THE BOX – one 3 metre (9.8 ft) length of black two-ply silicone ducting, 32mm (1 1/4 inch) bore, 37mm OD with a 2.5mm wall, plus two 30-40mm zinc plated worm drive hose clips sized for its 37mm outside diameter.
  • 💨 VENTILATION & AIR TRANSFER – moves air in and out of boat engine rooms, camper and van cabins, battery boxes, cabinets and enclosures that need venting. The ducting and its clips arrive in one order, so the run can go in the day it lands.
  • 🧵 Two-ply wall: coated glass-fibre liner, spring-steel helix bound with glass-fibre cord and a silicone outer jacket
  • 🌡️ Rated -70°C to +310°C continuous with short peaks to +350°C, so it stays soft and sealed on sustained hot-air duty
  • 🔩 MATCHED ZINC CLIPS – the 30-40mm zinc plated worm drive clips put the 37mm OD in the middle to upper part of their range, so they slide on and still close down tight. Push the ducting over the spigot and tighten one clip over each end.

Product description

Ventilation Duct 32mm x 3m Black 2-Ply Silicone with 2 Hose Clips

Flexible two-ply silicone ducting that moves air in and out of boat engine rooms, camper and van cabins, battery boxes, cabinets and enclosures that need venting, supplied with two zinc plated worm drive hose clips sized for it. It handles -70°C to +310°C continuously and short peaks to +350°C.

  • In the box: 1 x 3m black two-ply silicone ducting and 2 x 30-40mm zinc plated worm drive hose clips.
  • Internal bore: 32mm (1 1/4 inch)
  • Outside diameter: 37mm
  • Wall thickness: 2.5mm
  • Length supplied: 3m (9.8 ft)
  • Temperature rating: -70°C to +310°C (peak +350°C)
  • Colour: Black
  • Construction: two-ply silicone

Cut the 3m length to suit your run, push the ends over the spigots and tighten one of the supplied clips over each end.

Product details

BrandAutoSiliconeHoses.com
MaterialSilicone, Coated Fibreglass, Steel Wire, Glass Fibre, Zinc Plated Steel
ColourBlack
Inside diameter32mm
Outside diameter37mm
Wall thickness2.5mm
Length3m
Temperature range-70°C to +310°C
ShapeRound
Pack quantity1
ManufacturerAuto Silicone Hoses

Products related to this item