Turbo Silicone Reducer 38mm to 22mm Black with 2 Stainless T-Bolt Clamps

Clamp Ranges 44-47 & 29-31mm | 47/31mm OD | -50 to +180°C | 4.5mm Wall, 3 Ply | Joins Two Pipe Sizes | OEM-Style Gloss

Brand: AutoSiliconeHoses.com
  • -50°C TO +180°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£2095

Price includes VAT

Colour: Black
Size: 38mm (1 1/2") to 22mm (7/8")
How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

Not sure of your size? Hose size guide ›

Brand
AutoSiliconeHoses.com
Material
Silicone
Colour
Black
Reinforcement
3-ply polyester
Length
127mm
Temperature range
-50°C TO +180°C

About this item

  • 📦 WHAT'S IN THE BOX – one black silicone straight reducer from 38mm to 22mm internal diameter, 47/31mm outside diameter, plus one 44-47mm and one 29-31mm stainless steel T-bolt clamp: the part and a T-bolt clamp for each end in one order.
  • 🔧 JOINS TWO PIPE SIZES – steps a 38mm pipe down to 22mm in one moulded part. Match each internal diameter to the outside of the pipe it pushes over. Typical uses at this size: top and bottom radiator hoses, thermostat housing pipes, and turbo and intake hoses on smaller engines.
  • 🌡️ -50°C TO +180°C RATED – stays flexible next to a hot turbo and in cold weather, peak +250°C; working pressure 5 bar, burst pressure 15 bar.
  • 🛡️ 3-PLY POLYESTER REINFORCED, SAE J20 R3 – 3 layers of polyester fabric in the 4.5mm wall hold the shape under boost pressure and vacuum; silicone resists ozone, UV and ageing.
  • 🔩 STAINLESS T-BOLT CLAMPS – one 44-47mm and one 29-31mm stainless steel T-bolt clamp, each sized so the 47/31mm outside diameter sits inside its clamping range. Full stainless W4 grade with a wide, smooth band and a T-bolt that pulls up evenly all the way round for a firm seal on boost and intercooler pipework.

Product description

Turbo Silicone Reducer 38mm to 22mm Black with 2 Stainless T-Bolt Clamps

A silicone straight reducer from 38mm to 22mm internal diameter supplied with matching stainless steel T-bolt clamps, one for each end, rated -50°C to +180°C. T-bolt clamps give a stronger, more even grip than worm drive clips, so they suit turbo, intercooler and charge pipes where boost pressure can push a hose off. For air, water and coolant; not for fuel or oil.

  • ✅ In the box: 1 x silicone straight reducer from 38mm to 22mm internal diameter, 1 x 44-47mm stainless steel T-bolt clamp, 1 x 29-31mm stainless steel T-bolt clamp
  • Size: silicone straight reducer from 38mm to 22mm internal diameter, 47/31mm outside diameter, 4.5mm wall
  • Construction: 3-ply polyester reinforced silicone, SAE J20 R3
  • Pressure: 5 bar working, 15 bar burst
  • Clamps: full stainless steel W4 grade band, bridge, T-bolt and nut; wide band with a smooth inner face that won't cut into silicone; uniform 360° clamping, DIN 3017
  • How to measure: each clamp range is the outside diameter of the hose once it is pushed onto the pipe
  • Fitting: clean the pipe ends, push the part fully on, slip a clamp over each end about 5mm in from the edge and tighten the T-bolt evenly; re-check once the engine has been up to temperature

Product details

BrandAutoSiliconeHoses.com
MaterialSilicone
ColourBlack
Reinforcement3-ply polyester
Length127mm
Temperature range-50°C TO +180°C
ShapeCircular
Pack quantity1
ManufacturerAuto Silicone Hoses

Products related to this item