Trim Fix Model Making Spray Glue, 7 x 500ml
+110°C Heat Resistance | Approx 2m² Per Can, Depending on Application
Brand: PRO SURFACEAsk about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- PRO SURFACE
- Colour
- Transparent
About this item
- MODEL MAKING - For model-making projects using approved card, paper and compatible wood substrates. Test coatings and mating surfaces first. Do not use on polystyrene or solvent-sensitive modelling foams or plastics without specific compatibility confirmation.
- PACK CONTENTS - 7 x 500ml aerosol cans. Approx 2m² coverage per can, depending on the materials, coat thickness and application method.
- HIGH TEMPERATURE ADHESIVE - Trim Fix is heat resistant up to +110°C for compatible material bonding. This is the adhesive rating, not a safe aerosol storage temperature.
- CONTACT SPRAY APPLICATION - Spray both surfaces evenly, allow to become tacky, then press firmly together. Check material suitability and test an inconspicuous area before use.
- SAFETY - Extremely flammable aerosol. Contains dichloromethane; suspected of causing cancer. Use with adequate ventilation, avoid breathing spray and read the label and safety data sheet. Protect the can from sunlight and temperatures above 50°C.
Product description
Trim Fix contact spray adhesive for model making. For model-making projects using approved card, paper and compatible wood substrates. Test coatings and mating surfaces first. Do not use on polystyrene or solvent-sensitive modelling foams or plastics without specific compatibility confirmation. Supplied as 7 x 500ml aerosol cans. Heat resistant up to +110°C. Coverage is approximately 2m² per 500ml can and varies with application and material. Use only on the compatible substrates described above. Apply evenly to both surfaces, allow to become tacky, then press firmly together, following the can label. Danger: extremely flammable aerosol. Contains dichloromethane. Suspected of causing cancer. Causes skin and serious eye irritation; may cause drowsiness or dizziness. Use only with adequate ventilation and appropriate protective equipment; avoid breathing vapours or spray. Keep away from heat, sparks and flames. Pressurised container: may burst if heated. Do not pierce or burn, even after use. Protect from sunlight and do not expose the can to temperatures above 50°C. Read the label and safety data sheet before use.
Product details
| Brand | PRO SURFACE |
|---|---|
| Colour | Transparent |
| Pack quantity | 7 |
| Manufacturer | PRO SURFACE |