Straight Silicone Coupling Hose Red 54mm (2 1/8") ID x 950mm
Intercooler & Turbo Boost Pipes | 4-Ply, 5.5mm Wall, 65mm Outside Diameter | Extra Reach, Cut to Suit | -60°C to +180°C
Brand: AutoSiliconeHoses.com- -60°C to +180°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Reinforcement
- 4-ply polyester
- Temperature range
- -60°C to +180°C
About this item
- 📏 54mm (2 1/8") ID x 950mm STRAIGHT COUPLER - 54mm internal diameter, 5.5mm wall and 65mm Outside Diameter (OD). The 950mm piece suits long runs, and can be cut down to the exact length needed. Push it over two 54mm pipes or spigots of the same size to make a sealed inline joint.
- 🔧 BUILT FOR INTERCOOLER & TURBO BOOST PIPES - joins hard pipe, hose and spigots on coolant, radiator, heater, turbo, intercooler and air intake systems in cars, vans, motorbikes, trucks, plant and industrial machinery.
- 🌡️ HIGH TEMPERATURE SILICONE -60°C to +180°C - stays flexible through extreme heat and cold and resists ozone, UV and moisture, so it will not harden, crack or perish the way ageing rubber hose does.
- 🛡️ 4-PLY POLYESTER REINFORCED - 4 layers of polyester fabric inside a 5.5mm silicone wall hold the coupler's shape under boost pressure and vacuum, with a smooth bore for clean airflow and coolant flow.
- 🔴 RED GLOSS FINISH - a smart red silicone joiner for a tidy engine bay. Cut with a sharp blade for a shorter joint, and secure each end with a hose clip sized for a 65mm Outside Diameter (OD). Also available in blue and black.
Product description
Straight Silicone Coupling Hose, Red, 54mm (2 1/8") ID x 950mm
A straight silicone coupler that joins two pipes or spigots of the same 54mm diameter with a sealed, flexible joint. It absorbs engine movement and vibration and stays leak-free through constant hot and cold cycles, which makes it a long-lasting replacement for rubber hose joints.
- ✅ 54mm internal diameter, 5.5mm wall, 65mm Outside Diameter (OD), 950mm piece
- ✅ 4-ply polyester fabric reinforcement for boost pressure and vacuum
- Operating temperature -60°C to +180°C
- Resists ozone, UV, moisture and coolant, and stays flexible for its whole service life
- High-gloss red finish, also available in blue and black
Applications: radiator and coolant hoses, heater pipes, turbo and supercharger boost pipes, intercooler pipework, induction kits and cold air intakes, breathers and general air and water transfer on cars, vans, motorbikes, 4x4s, trucks, buses, tractors, plant and industrial machinery.
Fitting: clean both pipe ends, push the coupler on evenly so each pipe sits well inside the joint, and secure each end with a correctly sized hose clip or T-bolt clamp (not included).
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Reinforcement | 4-ply polyester |
| Temperature range | -60°C to +180°C |
| Manufacturer | Auto Silicone Hoses |