Silicone T-Piece Hose 25mm (1") ID Equal Tee, Red + 3 Hose Clips
Three 25-35 mm Zinc Clamps | -50 to +220°C | 34mm OD | 4.5mm Wall, 3 Ply | SAE J20 R3 | 127mm Long | Race-Style Gloss
Brand: AutoSiliconeHoses.com- 25mm ID
- 34mm OD
- 4.5mm wall
- -50°C TO +220°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- Silicone
- Colour
- Red
- Inside diameter
- 25mm
- Outside diameter
- 34mm
- Wall thickness
- 4.5mm
- Length
- 127mm
- Temperature range
- -50°C TO +220°C
- Maximum pressure
- 16 bar
About this item
- 📦 WHAT'S IN THE BOX – one red silicone T-piece with all three ends 25mm 1" ID x 34mm OD, 127mm long, plus three 25-35mm zinc plated worm drive hose clips: a clamp for every end in one order.
- 🔧 TEE OFF A SECOND LINE – a T-piece with a 25mm branch splits one line into two (or joins two into one), for example to tee off a heater or sensor feed. Typical uses at this size: heater matrix feeds and returns, expansion tank and overflow pipes, and small radiator and water pump hoses. For air, water and coolant; not for fuel or oil.
- 🌡️ -50°C TO +220°C RATED – rated -50°C to +220°C with a peak of +250°C for the cooling, heater and intake circuits; working pressure 5.5 bar, burst pressure 16 bar.
- 🛡️ SAE J20 R3, 3 PLY POLYESTER REINFORCED – smooth extruded silicone with 3 layers of polyester fabric in the 4.5mm wall, so it holds its shape under pressure and resists ozone, UV light, weathering and ageing.
- 🔩 MATCHED ZINC CLIPS – the three 25-35mm W1 zinc plated worm drive clips suit the 34mm outside diameter: push each end fully onto its pipe, slide a clip over it and tighten with a flat screwdriver or nut driver.
Product description
Silicone T-Piece Hose 25mm (1") ID Equal Tee, Red + 3 Hose Clips
A silicone T-piece supplied with 3 matching zinc plated worm drive hose clips, one for each end. 3 ply polyester reinforced silicone for air, water and coolant (not fuel or oil), rated -50°C to +220°C (peak +250°C).
- ✅ In the box: 1 x silicone T-piece 25mm ID and 3 x 25-35mm zinc plated worm drive hose clips
- Size: 25mm ID 1", 4.5mm wall, 34mm outside diameter, 127mm long
- Pressure: 5.5 bar working, 16 bar burst
- Standard: SAE J20 R3
- Typical uses: heater matrix feeds and returns, expansion tank and overflow pipes, and small radiator and water pump hoses
- Fitting: push each end fully onto its pipe and tighten one clip over each end; re-check once the engine has been up to temperature
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | Silicone |
| Colour | Red |
| Inside diameter | 25mm |
| Outside diameter | 34mm |
| Wall thickness | 4.5mm |
| Length | 127mm |
| Temperature range | -50°C TO +220°C |
| Maximum pressure | 16 bar |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | Auto Silicone Hoses |