Silicone Straight Reducer 38-22mm Black + 2 Stainless T-Bolt Clamps
Clamp Ranges 44-47 & 29-31mm | 47/31mm OD | -60 to +180°C | 4.5mm Wall, 3 Ply | Steps Down Pipe Sizes | OEM-Style Gloss
Brand: AP Automotive- 47mm OD
- 4.5mm wall · 3-ply
- -60°C TO +180°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AP Automotive
- Material
- Silicone
- Colour
- Black
- Outside diameter
- 47mm
- Wall thickness
- 4.5mm
- Reinforcement
- 3-ply polyester
- Length
- 127mm
- Temperature range
- -60°C TO +180°C
- Maximum pressure
- 15 bar
About this item
- 📦 WHAT'S IN THE BOX – one black silicone straight reducer from 38mm to 22mm internal diameter, 47/31mm outside diameter, plus one 44-47mm and one 29-31mm stainless steel T-bolt clamp: the part and a T-bolt clamp for each end in one order.
- 🔧 JOINS TWO PIPE SIZES – steps a 38mm pipe down to 22mm in one moulded part. Match each internal diameter to the outside of the pipe it pushes over.
- 🌡️ -60°C TO +180°C RATED – silicone stays flexible next to a hot turbo and in cold weather; burst pressure 15 bar.
- 🛡️ 3-PLY POLYESTER REINFORCED – 3 layers of polyester fabric in the 4.5mm wall hold the shape under boost pressure and vacuum; silicone resists ozone, UV and ageing.
- 🔩 STAINLESS T-BOLT CLAMPS – one 44-47mm and one 29-31mm stainless steel T-bolt clamp, each sized so the 47/31mm outside diameter sits inside its clamping range. Full stainless W4 grade with a wide, smooth band and a T-bolt that pulls up evenly all the way round for a firm seal on boost and intercooler pipework.
Product description
Silicone Straight Reducer 38-22mm Black + 2 Stainless T-Bolt Clamps
A silicone straight reducer from 38mm to 22mm internal diameter supplied with matching stainless steel T-bolt clamps, one for each end, rated -60°C to +180°C. T-bolt clamps give a stronger, more even grip than worm drive clips, so they suit turbo, intercooler and charge pipes where boost pressure can push a hose off. For air, water and coolant; not for fuel or oil.
- ✅ In the box: 1 x silicone straight reducer from 38mm to 22mm internal diameter, 1 x 44-47mm stainless steel T-bolt clamp, 1 x 29-31mm stainless steel T-bolt clamp
- Size: silicone straight reducer from 38mm to 22mm internal diameter, 47/31mm outside diameter, 4.5mm wall
- Construction: 3-ply polyester reinforced silicone
- Pressure: 15 bar burst
- Clamps: full stainless steel W4 grade band, bridge, T-bolt and nut; wide band with a smooth inner face that won't cut into silicone; uniform 360° clamping, DIN 3017
- How to measure: each clamp range is the outside diameter of the hose once it is pushed onto the pipe
- Fitting: clean the pipe ends, push the hose fully on, slip a clamp over each end about 5mm in from the edge and tighten the T-bolt evenly; re-check once the engine has been up to temperature
Product details
| Brand | AP Automotive |
|---|---|
| Material | Silicone |
| Colour | Black |
| Outside diameter | 47mm |
| Wall thickness | 4.5mm |
| Reinforcement | 3-ply polyester |
| Length | 127mm |
| Temperature range | -60°C TO +180°C |
| Maximum pressure | 15 bar |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | AP Automotive |