Silicone Universal Coolant Coupler Hose Pipe Blue 152mm (6") ID x 50mm
Air Intake & Induction Ducting | 4-Ply, 5.5mm Wall, 163mm Outside Diameter | Short Joint, Tight Engine Bays | -60°C to +180°C
Brand: AutoSiliconeHoses.com- 152mm (6") ID
- 5.5mm wall · 4-ply
- -60°C to +180°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit$26.00
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips$35.00
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers$73.00
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat$20.00
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- Silicone Rubber
- Colour
- Blue
- Inside diameter
- 152mm (6")
- Wall thickness
- 5.5mm
- Reinforcement
- 4-ply polyester
- Length
- 50mm
- Temperature range
- -60°C to +180°C
- Maximum pressure
- 4.5 bar
About this item
- 📏 152mm (6") ID x 50mm STRAIGHT COUPLER - 152mm internal diameter, 5.5mm wall and 163mm Outside Diameter (OD). The 50mm length makes a short joint for tight engine bays. Push it over two 152mm pipes or spigots of the same size to make a sealed inline joint.
- 🔧 BUILT FOR AIR INTAKE & INDUCTION DUCTING - at 152mm bore it suits air intakes, induction kits, cold air feeds and large-bore ducting, on cars, vans, motorbikes, 4x4s, trucks, tractors, plant and industrial machinery.
- 🌡️ HIGH TEMPERATURE SILICONE -60°C to +180°C - stays flexible through extreme heat and cold and resists ozone, UV and moisture, so it will not harden, crack or perish the way ageing rubber hose does.
- 🛡️ 4-PLY POLYESTER REINFORCED - 4 layers of polyester fabric inside a 5.5mm silicone wall hold the 152mm bore round under boost pressure and vacuum, with a smooth inner surface for clean airflow and coolant flow.
- 🔵 BLUE GLOSS FINISH - a smart blue silicone joiner for a tidy engine bay. Cut with a sharp blade for a shorter joint, and secure each end with a hose clip sized for the 163mm Outside Diameter (OD). Also available in red and black.
Product description
When "good enough" won't cut it for your engine, Auto Silicone Hoses delivers the ultimate high-performance connection. We don't just manufacture hoses; we engineer heavy-duty automotive lifelines that thrive where factory rubber fails. Built to dominate high-boost turbo environments and extreme thermal cycles, Auto Silicone Hoses are the gold standard for enthusiasts and professional racers who demand a leak-proof, burst-resistant setup. Our standard couplers provide the perfect balance of flexibility and rigid structural integrity, ensuring your coolant, air intake, or intercooler systems operate at peak efficiency without the risk of ozone degradation or heat-induced cracking. If you are looking to bulletproof your cooling system while adding a professional, high-gloss finish to your engine bay, Auto Silicone Hoses is the only name you need for reliability that goes the distance on the track or the street.
- Unmatched Reinforcement: Features high-tensile Polyester reinforcement layers for maximum pressure resistance and structural stability under load.
- Precision Wall Thickness: Engineered with 3-ply (4.5mm) walls for diameters up to 48mm, and heavy-duty 4-ply (5.5mm) from 51mm upwards.
- Thermal Mastery: Remains fully flexible in an operating range of -60°C to +180°C.
- Safety Engineering: Designed with a strict 3:1 safety factor to prevent catastrophic bursts; fully compliant with SAEJ20R3 standards.
- Color Options: Available in signature high-gloss Blue, Red, or classic Black to match your specific vehicle aesthetic.
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | Silicone Rubber |
| Colour | Blue |
| Inside diameter | 152mm (6") |
| Wall thickness | 5.5mm |
| Reinforcement | 4-ply polyester |
| Length | 50mm |
| Temperature range | -60°C to +180°C |
| Maximum pressure | 4.5 bar |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | Auto Silicone Hoses |