Silicone Hump Hose Coupler 90mm (3 1/2") ID Red + 2 Hose Clips
Pair of 90-120 mm Zinc Clamps | -50 to +180°C | 101mm OD | 5.5mm Wall, 4 Ply | SAE J20 R3 | 102mm Long | Race-Style Gloss
Brand: AutoSiliconeHoses.com- 90mm ID
- 101mm OD
- 5.5mm wall
- -50°C TO +180°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- Silicone
- Colour
- Red
- Inside diameter
- 90mm
- Outside diameter
- 101mm
- Wall thickness
- 5.5mm
- Length
- 102mm
- Temperature range
- -50°C TO +180°C
- Maximum pressure
- 9.5 bar
About this item
- 📦 WHAT'S IN THE BOX – one red silicone hump hose coupler, 90mm 3 1/2" ID x 101mm OD and 102mm long, plus two 90-120mm zinc plated worm drive hose clips: the coupler and a clamp for each end in one order.
- 🔧 FLEXIBLE HUMP COUPLER – the hump in the middle flexes to absorb engine movement and vibration, so joints are not pulled apart or cracked. Typical uses at this size: intercooler and charge pipes, large bore induction and air intake pipework, and performance radiator hoses. For air, water and coolant; not for fuel or oil.
- 🌡️ -50°C TO +180°C RATED – rated -50°C to +180°C with a peak of +250°C for the cooling, heater and intake circuits; working pressure 3.2 bar, burst pressure 9.5 bar.
- 🛡️ SAE J20 R3, 4 PLY POLYESTER REINFORCED – smooth extruded silicone with 4 layers of polyester fabric in the 5.5mm wall, so it holds its shape under pressure and resists ozone, UV light, weathering and ageing.
- 🔩 MATCHED ZINC CLIPS – the two 90-120mm W1 zinc plated worm drive clips suit the 101mm outside diameter: push each end fully onto its pipe, slide a clip over it and tighten with a flat screwdriver or nut driver.
Product description
Silicone Hump Hose Coupler 90mm (3 1/2") ID Red + 2 Hose Clips
A silicone hump hose coupler supplied with 2 matching zinc plated worm drive hose clips, one for each end. 4 ply polyester reinforced silicone for air, water and coolant (not fuel or oil), rated -50°C to +180°C (peak +250°C).
- ✅ In the box: 1 x silicone hump hose coupler 90mm ID and 2 x 90-120mm zinc plated worm drive hose clips
- Size: 90mm ID 3 1/2", 5.5mm wall, 101mm outside diameter, 102mm long
- Pressure: 3.2 bar working, 9.5 bar burst
- Standard: SAE J20 R3
- Typical uses: intercooler and charge pipes, large bore induction and air intake pipework, and performance radiator hoses
- Fitting: push each end fully onto its pipe and tighten one clip over each end; re-check once the engine has been up to temperature
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | Silicone |
| Colour | Red |
| Inside diameter | 90mm |
| Outside diameter | 101mm |
| Wall thickness | 5.5mm |
| Length | 102mm |
| Temperature range | -50°C TO +180°C |
| Maximum pressure | 9.5 bar |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | Auto Silicone Hoses |