Silicone Hump Hose Coupler 80mm ID Red, Intercooler & Intake Pipe
60 to +180°C | 5.5mm Wall, 4 Ply | 91mm Outside Diameter (OD) | 10 Bar Burst | Absorbs Engine Movement | Race-Style Gloss
Brand: HOSES UK- 80mm (3 1/8") ID
- 91mm OD
- 5.5mm wall · 4-ply
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit$26.00
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips$35.00
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers$73.00
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat$20.00
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
- Brand
- HOSES UK
- Material
- Silicone Rubber
- Colour
- Red
- Inside diameter
- 80mm (3 1/8")
- Outside diameter
- 91mm
- Wall thickness
- 5.5mm
- Reinforcement
- 4-ply polyester
- Length
- 100mm
- Maximum pressure
- 10 bar
About this item
- 📏 80mm (3 1/8") INTERNAL DIAMETER (ID) HUMP HOSE COUPLER - 80mm bore, 5.5mm wall and an Outside Diameter (OD) of 91mm, 102mm long with a central flex hump. Match the ID to the outside of the pipe or spigot it pushes over.
- 🔧 ABSORBS ENGINE MOVEMENT - the hump flexes with engine rock and vibration so rigid 80mm intercooler, turbo and intake pipes don't crack or pop off.
- 🌡️ HIGH TEMPERATURE SILICONE -60 to +180°C - stays flexible in heat and cold and resists ozone, UV, coolant and weathering, so it won't harden, crack or perish like ageing rubber.
- 🛡️ 4-PLY POLYESTER FABRIC REINFORCED, SAE J20 R3 - holds its shape under boost pressure and vacuum (3.3 bar working / 10 bar burst), with a smooth bore for clean flow.
- 🔴 RED GLOSS FINISH - a smart red silicone part for a tidy engine bay. Secure each end with a hose clip or T-bolt clamp sized for 91mm Outside Diameter (OD) (not included).
Product description
Silicone Hump Hose Coupler 80mm ID Red, Intercooler & Intake Pipe
A silicone hump hose coupler in red silicone for intercooler, induction and air intake pipework, and large-bore coolant pipes. It stays sealed and flexible through constant heat cycles and engine vibration, and outlasts rubber hose.
- 80mm internal diameter, 5.5mm wall, Outside Diameter (OD) 91mm
- 4-ply polyester fabric reinforcement, SAE J20 R3, 3.3 bar working / 10 bar burst
- Operating temperature -60 to +180°C
Fitting: clean the pipe ends, push the hose fully on, and secure each end with a correctly sized hose clip or clamp.
Product details
| Brand | HOSES UK |
|---|---|
| Material | Silicone Rubber |
| Colour | Red |
| Inside diameter | 80mm (3 1/8") |
| Outside diameter | 91mm |
| Wall thickness | 5.5mm |
| Reinforcement | 4-ply polyester |
| Length | 100mm |
| Maximum pressure | 10 bar |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | HOSES UK |