Silicone Hump Hose Coupler 45mm (1 3/4") ID Red + 2 Hose Clips

Pair of 45-60 mm Zinc Clamps | -50 to +180°C | 54mm OD | 4.5mm Wall, 3 Ply | SAE J20 R3 | 102mm Long | Race-Style Gloss

Brand: AutoSiliconeHoses.com
  • 45mm ID
  • 54mm OD
  • 4.5mm wall
  • -50°C TO +180°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£1900

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
AutoSiliconeHoses.com
Material
Silicone
Colour
Red
Inside diameter
45mm
Outside diameter
54mm
Wall thickness
4.5mm
Length
102mm
Temperature range
-50°C TO +180°C
Maximum pressure
14 bar

About this item

  • 📦 WHAT'S IN THE BOX – one red silicone hump hose coupler, 45mm 1 3/4" ID x 54mm OD and 102mm long, plus two 45-60mm zinc plated worm drive hose clips: the coupler and a clamp for each end in one order.
  • 🔧 FLEXIBLE HUMP COUPLER – the hump in the middle flexes to absorb engine movement and vibration, so joints are not pulled apart or cracked. Typical uses at this size: top and bottom radiator hoses, thermostat housing pipes, and turbo and intake hoses on smaller engines. For air, water and coolant; not for fuel or oil.
  • 🌡️ -50°C TO +180°C RATED – rated -50°C to +180°C with a peak of +250°C for the cooling, heater and intake circuits; working pressure 4.7 bar, burst pressure 14 bar.
  • 🛡️ SAE J20 R3, 3 PLY POLYESTER REINFORCED – smooth extruded silicone with 3 layers of polyester fabric in the 4.5mm wall, so it holds its shape under pressure and resists ozone, UV light, weathering and ageing.
  • 🔩 MATCHED ZINC CLIPS – the two 45-60mm W1 zinc plated worm drive clips suit the 54mm outside diameter: push each end fully onto its pipe, slide a clip over it and tighten with a flat screwdriver or nut driver.

Product description

Silicone Hump Hose Coupler 45mm (1 3/4") ID Red + 2 Hose Clips

A silicone hump hose coupler supplied with 2 matching zinc plated worm drive hose clips, one for each end. 3 ply polyester reinforced silicone for air, water and coolant (not fuel or oil), rated -50°C to +180°C (peak +250°C).

  • ✅ In the box: 1 x silicone hump hose coupler 45mm ID and 2 x 45-60mm zinc plated worm drive hose clips
  • Size: 45mm ID 1 3/4", 4.5mm wall, 54mm outside diameter, 102mm long
  • Pressure: 4.7 bar working, 14 bar burst
  • Standard: SAE J20 R3
  • Typical uses: top and bottom radiator hoses, thermostat housing pipes, and turbo and intake hoses on smaller engines
  • Fitting: push each end fully onto its pipe and tighten one clip over each end; re-check once the engine has been up to temperature

Product details

BrandAutoSiliconeHoses.com
MaterialSilicone
ColourRed
Inside diameter45mm
Outside diameter54mm
Wall thickness4.5mm
Length102mm
Temperature range-50°C TO +180°C
Maximum pressure14 bar
ShapeCircular
Pack quantity1
ManufacturerAuto Silicone Hoses

Products related to this item