Silicone Hump Hose Coupler 25mm ID Blue, Coolant & Heater Pipe
60 to +180°C | 4.5mm Wall, 3 Ply | 34mm Outside Diameter (OD) | 16 Bar Burst | Absorbs Engine Movement | Show-Car Gloss
Brand: HOSES UK- 25mm (1") ID
- 34mm OD
- 4.5mm wall · 3-ply
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- HOSES UK
- Material
- Silicone Rubber
- Colour
- Blue
- Inside diameter
- 25mm (1")
- Outside diameter
- 34mm
- Wall thickness
- 4.5mm
- Reinforcement
- 3-ply polyester
- Length
- 100mm
- Maximum pressure
- 16 bar
About this item
- 📏 25mm (1") INTERNAL DIAMETER (ID) HUMP HOSE COUPLER - 25mm bore, 4.5mm wall and an Outside Diameter (OD) of 34mm, 102mm long with a central flex hump. Match the ID to the outside of the pipe or spigot it pushes over.
- 🔧 ABSORBS ENGINE MOVEMENT - the hump flexes with engine rock and vibration so rigid 25mm intercooler, turbo and intake pipes don't crack or pop off.
- 🌡️ HIGH TEMPERATURE SILICONE -60 to +180°C - stays flexible in heat and cold and resists ozone, UV, coolant and weathering, so it won't harden, crack or perish like ageing rubber.
- 🛡️ 3-PLY POLYESTER FABRIC REINFORCED, SAE J20 R3 - holds its shape under boost pressure and vacuum (5.5 bar working / 16 bar burst), with a smooth bore for clean flow.
- 🔵 BLUE GLOSS FINISH - a smart blue silicone part for a tidy engine bay. Secure each end with a hose clip or T-bolt clamp sized for 34mm Outside Diameter (OD) (not included).
Product description
Silicone Hump Hose Coupler 25mm ID Blue, Coolant & Heater Pipe
A silicone hump hose coupler in blue silicone for coolant, heater and bypass hoses, header-tank and overflow pipes, and small turbo and breather lines. It stays sealed and flexible through constant heat cycles and engine vibration, and outlasts rubber hose.
- 25mm internal diameter, 4.5mm wall, Outside Diameter (OD) 34mm
- 3-ply polyester fabric reinforcement, SAE J20 R3, 5.5 bar working / 16 bar burst
- Operating temperature -60 to +180°C
Fitting: clean the pipe ends, push the hose fully on, and secure each end with a correctly sized hose clip or clamp.
Product details
| Brand | HOSES UK |
|---|---|
| Material | Silicone Rubber |
| Colour | Blue |
| Inside diameter | 25mm (1") |
| Outside diameter | 34mm |
| Wall thickness | 4.5mm |
| Reinforcement | 3-ply polyester |
| Length | 100mm |
| Maximum pressure | 16 bar |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | HOSES UK |