Silicone Hose Reducer 12mm to 8mm Straight Black with 2 Hose Clips
18-25mm & 16-22mm Stainless Clamps | -60 to +180°C | 21/17mm OD | Joins Two Different Sizes | OEM-Style Gloss
Brand: HOSES UK- -60°C TO +180°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- HOSES UK
- Material
- Silicone
- Colour
- Black
- Reinforcement
- 3-ply polyester
- Length
- 127mm
- Temperature range
- -60°C TO +180°C
About this item
- 📦 WHAT'S IN THE BOX – one straight reducer from 12mm to 8mm internal diameter, 21/17mm outside diameter, plus one 18-25mm and one 16-22mm stainless steel worm drive hose clip: the part and a clamp for each end in one order.
- 🔧 JOINS TWO SIZES – steps a 12mm pipe down to 8mm, for turbo, intercooler, intake and coolant pipework. Match each internal diameter to the outside of the pipe it pushes over. For air, water and coolant; not for fuel or oil.
- 🌡️ -60°C TO +180°C RATED – stays flexible in heat and cold; 9 bar working, 30 bar burst, and resists ozone, UV and coolant so it won't harden or perish like ageing rubber.
- 🛡️ 3-PLY POLYESTER REINFORCED, SAE J20 R3 – 3 layers of polyester fabric in the 4.5mm wall hold the shape under boost pressure and vacuum, with a smooth bore for clean flow.
- 🔩 MATCHED STAINLESS CLIPS – one 18-25mm and one 16-22mm stainless steel worm drive hose clip sized for the 21/17mm outside diameter: push the part fully on, slide the clip over it and tighten with a flat screwdriver or nut driver.
Product description
Silicone Hose Reducer 12mm to 8mm Straight Black with 2 Hose Clips
A straight reducer from 12mm to 8mm internal diameter supplied with matching stainless steel worm drive hose clips, rated -60°C to +180°C. For air, water and coolant; not for fuel or oil.
- ✅ In the box: 1 x straight reducer from 12mm to 8mm internal diameter, 1 x 18-25mm stainless steel worm drive hose clip, 1 x 16-22mm stainless steel worm drive hose clip
- Size: straight reducer from 12mm to 8mm internal diameter, 21/17mm outside diameter, 4.5mm wall
- Construction: 3-ply polyester reinforced silicone, SAE J20 R3
- Pressure: 9 bar working, 30 bar burst
- Fitting: clean the pipe ends, push the part fully on and tighten one clip over each end; re-check once the engine has been up to temperature
Product details
| Brand | HOSES UK |
|---|---|
| Material | Silicone |
| Colour | Black |
| Reinforcement | 3-ply polyester |
| Length | 127mm |
| Temperature range | -60°C TO +180°C |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | HOSES UK |