Silicone Hose Reducer 83mm to 70mm Straight Red, Intake Pipe
60 to +180°C | 5.5mm Wall, 4 Ply | Outside Diameter (OD) 94/81mm | 9.5 Bar Burst | Joins Two Different Sizes
Brand: HOSES UK- 83mm To 70mm (3 1/4" To 2 3/4") ID
- 5.5mm wall · 4-ply
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- HOSES UK
- Material
- Silicone Rubber
- Colour
- Red
- Inside diameter
- 83mm To 70mm (3 1/4" To 2 3/4")
- Wall thickness
- 5.5mm
- Reinforcement
- 4-ply polyester
- Length
- 127mm
- Maximum pressure
- 9.5 bar
About this item
- 📏 83mm (3 1/4") TO 70mm (2 3/4") ID STRAIGHT REDUCER - steps a 83mm pipe down to 70mm. 5.5mm wall, Outside Diameter (OD) 94mm / 81mm, 127mm long. Match each ID to the outside of the pipe it pushes over.
- 🔧 MADE FOR THE COOLING, BOOST AND INTAKE SYSTEM - suits intercooler, induction and air intake pipework, and large-bore coolant pipes on cars, vans, motorbikes, 4x4s, trucks, plant and marine engines.
- 🌡️ HIGH TEMPERATURE SILICONE -60 to +180°C - stays flexible in heat and cold and resists ozone, UV, coolant and weathering, so it won't harden, crack or perish like ageing rubber.
- 🛡️ 4-PLY POLYESTER FABRIC REINFORCED, SAE J20 R3 - holds its shape under boost pressure and vacuum (3.2 bar working / 9.5 bar burst), with a smooth bore for clean flow.
- 🔴 RED GLOSS FINISH - a smart red silicone part for a tidy engine bay. Secure each end with a hose clip or T-bolt clamp sized for 94mm Outside Diameter (OD) (not included). Also available in blue and black.
Product description
Silicone Hose Reducer 83mm to 70mm Straight Red, Intake Pipe
A silicone straight reducer hose in red silicone for intercooler, induction and air intake pipework, and large-bore coolant pipes. It stays sealed and flexible through constant heat cycles and engine vibration, and outlasts rubber hose.
- 83/70mm internal diameter, 5.5/5.5mm wall, Outside Diameter (OD) 94/81mm
- 4-ply polyester fabric reinforcement, SAE J20 R3, 3.2 bar working / 9.5 bar burst
- Operating temperature -60 to +180°C
Fitting: clean the pipe ends, push the hose fully on, and secure each end with a correctly sized hose clip or clamp.
Product details
| Brand | HOSES UK |
|---|---|
| Material | Silicone Rubber |
| Colour | Red |
| Inside diameter | 83mm To 70mm (3 1/4" To 2 3/4") |
| Wall thickness | 5.5mm |
| Reinforcement | 4-ply polyester |
| Length | 127mm |
| Maximum pressure | 9.5 bar |
| Shape | Circular |
| Manufacturer | HOSES UK |