Silicone Hose 5m Straight Length 13mm (1/2") ID Red, Coolant Pipe
50 to +180°C | 4.5mm Wall, 3 Ply Polyester | 22mm Outside Diameter (OD) | 5 Metres Long, Cut To Size | Race-Style Gloss
Brand: AutoSiliconeHoses.com- 13mm ID
- 22mm OD
- 4.5mm wall
- -50°C TO +180°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- Silicone
- Colour
- Red
- Inside diameter
- 13mm
- Outside diameter
- 22mm
- Wall thickness
- 4.5mm
- Length
- 5m
- Temperature range
- -50°C TO +180°C
- Maximum pressure
- 27 bar
About this item
- 📏 13mm (1/2") INTERNAL DIAMETER (ID) 5 METRE STRAIGHT HOSE - 4.5mm wall and an Outside Diameter (OD) of 22mm. 5 metres long (about 16 feet), cut to the length you need. Match the ID to the outside of the pipe or outlet it pushes onto.
- 🔧 CUT TO ANY LENGTH - A straight 5 metre length you can cut to exactly the size you need with a sharp knife. Typical uses at this size: vacuum and breather lines, heater bypass and small coolant feeds, and throttle body coolant pipes. For air, water and coolant; not suitable for fuel or oil (choose our Fluoro Lined fuel and oil hose for those).
- 🌡️ -50°C TO +180°C OPERATING RANGE - Rated -50°C to +180°C with a peak of +250°C, so it copes near the engine block and manifold where small rubber lines harden and split with age. Working pressure 8.3 bar, burst pressure 27 bar (3:1 safety factor).
- 🛡️ SAE J20 R3, 3 PLY POLYESTER REINFORCED - Smooth extruded silicone inner with 3 layers of polyester fabric in the 4.5mm wall, so it holds its shape under pressure and resists swelling. The silicone resists ozone, UV light, weathering and ageing, so it lasts outdoors and in the engine bay without perishing.
- 🔴 RED - FITTING TIP - Push the hose fully onto the pipe, then use hose clips whose range covers about 22mm (the Outside Diameter). Red silicone gives a bold race-style look that makes joints and clips easy to check. Also available in other colours and sizes.
Product description
Silicone Straight Hose - 13mm ID, Red
A straight 5 metre length you can cut to exactly the size you need with a sharp knife. Made by Auto Silicone Hoses from polyester reinforced silicone for air, water and coolant (not fuel or oil), it stays flexible from -50°C to +180°C and will not perish, go hard or crack with heat cycling the way ordinary rubber hose does.
Specification
- Size: 13mm ID (1/2"), 4.5mm wall, 22mm Outside Diameter (OD)
- Temperature: -50°C to +180°C (peak +250°C)
- Pressure: 8.3 bar working, 27 bar burst (3:1 safety factor)
- Length: 5 metres
- Construction: smooth extruded silicone, 3 ply polyester reinforced
- Standard: SAE J20 R3
- Colour: Red
Typical uses at this size: vacuum and breather lines, heater bypass and small coolant feeds, and throttle body coolant pipes. Suits cars, vans, motorbikes, marine and industrial applications.
Fitting: push the hose fully onto the pipe, then use hose clips whose range covers about 22mm (the Outside Diameter). Cut with a sharp knife for a square end. Re-check clips once the engine has been up to temperature.
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | Silicone |
| Colour | Red |
| Inside diameter | 13mm |
| Outside diameter | 22mm |
| Wall thickness | 4.5mm |
| Length | 5m |
| Temperature range | -50°C TO +180°C |
| Maximum pressure | 27 bar |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | Auto Silicone Hoses |