Silicone Hose 1m 68mm (None) ID Black with 2 Stainless T-Bolt Clamps

Clamp Range 74-79mm | 79mm OD | Up to +180°C | 5.5mm Wall, 4 Ply | Cut To Any Length | OEM-Style Gloss

Brand: AutoSiliconeHoses.com
  • 79mm OD
  • 5.5mm wall · 4-ply

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£5595

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
AutoSiliconeHoses.com
Material
Silicone
Colour
Black
Outside diameter
79mm
Wall thickness
5.5mm
Reinforcement
4-ply polyester
Length
1m

About this item

  • 📦 WHAT'S IN THE BOX – one black 1 metre silicone hose, 68mm internal diameter x 79mm outside diameter, plus two 74-79mm stainless steel T-bolt clamps: the part and a T-bolt clamp for each end in one order.
  • 🔧 CUT TO THE LENGTH YOU NEED – a straight 1 metre length of silicone hose you trim to size with a sharp knife, then secure each end with one of the T-bolt clamps. Match the internal diameter to the outside of the pipe it pushes over.
  • 🌡️ RATED UP TO +180°C – silicone stays flexible next to a hot turbo and in cold weather.
  • 🛡️ 4-PLY POLYESTER REINFORCED – 4 layers of polyester fabric in the 5.5mm wall hold the shape under boost pressure and vacuum; silicone resists ozone, UV and ageing.
  • 🔩 STAINLESS T-BOLT CLAMPS – two 74-79mm stainless steel T-bolt clamps, each sized so the 79mm outside diameter sits inside its clamping range. Full stainless W4 grade with a wide, smooth band and a T-bolt that pulls up evenly all the way round for a firm seal on boost and intercooler pipework.

Product description

Silicone Hose 1m 68mm (None) ID Black with 2 Stainless T-Bolt Clamps

A 1 metre silicone hose supplied with matching stainless steel T-bolt clamps, one for each end, rated up to +180°C. T-bolt clamps give a stronger, more even grip than worm drive clips, so they suit turbo, intercooler and charge pipes where boost pressure can push a hose off. For air, water and coolant; not for fuel or oil.

  • ✅ In the box: 1 x 1 metre silicone hose, 2 x 74-79mm stainless steel T-bolt clamps
  • Size: 1 metre silicone hose, 68mm internal diameter x 79mm outside diameter, 5.5mm wall
  • Construction: 4-ply polyester reinforced silicone
  • Clamps: full stainless steel W4 grade band, bridge, T-bolt and nut; wide band with a smooth inner face that won't cut into silicone; uniform 360° clamping, DIN 3017
  • How to measure: each clamp range is the outside diameter of the hose once it is pushed onto the pipe
  • Fitting: clean the pipe ends, push the hose fully on, slip a clamp over each end about 5mm in from the edge and tighten the T-bolt evenly; re-check once the engine has been up to temperature

Product details

BrandAutoSiliconeHoses.com
MaterialSilicone
ColourBlack
Outside diameter79mm
Wall thickness5.5mm
Reinforcement4-ply polyester
Length1m
ShapeCircular
Pack quantity1
ManufacturerAuto Silicone Hoses

Products related to this item