Silicone End Cap Blanking Bung 6mm (1/4") ID Red with 1 Hose Clip

Single 11-16mm Zinc Clamp | -50 to +220°C | 13mm OD | 3.5mm Wall | Unreinforced, Low Pressure | Race-Style Gloss

Brand: HOSES UK
  • -50°C TO +220°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£795

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
HOSES UK
Material
Silicone
Colour
Red
Length
35mm
Temperature range
-50°C TO +220°C

About this item

  • 📦 WHAT'S IN THE BOX – one silicone blanking cap, 6mm (1/4") internal diameter, 13mm outside diameter, plus one 11-16mm zinc plated worm drive hose clip: the cap and its clamp in one order.
  • 🛑 BLOCKS OFF A 6.5mm PIPE – push the cap over a 6.5mm outside diameter pipe, spigot or port to blank off unused vacuum, breather, coolant and air spigots, or to seal a pipe end during repairs and testing. Unreinforced: for vacuum and low-pressure use.
  • 🌡️ -50°C TO +220°C RATED – stays flexible in heat and cold, and resists ozone, UV and coolant so it won't harden or perish like ageing rubber.
  • 🛡️ SOFT SILICONE, SAE J20 R3 – 3.5mm wall silicone that stays soft and sealing in the engine bay and resists ozone, UV and coolant.
  • 🔩 MATCHED ZINC CLIP – one 11-16mm zinc plated worm drive hose clip sized for the 13mm outside diameter: push the cap fully on, slide the clip over it and tighten with a flat screwdriver or nut driver.

Product description

Silicone End Cap Blanking Bung 6mm (1/4") ID Red with 1 Hose Clip

A silicone blanking cap supplied with matching zinc plated worm drive hose clip, rated -50°C to +220°C. For air, water and coolant; not for fuel or oil.

  • ✅ In the box: 1 x silicone blanking cap, 1 x 11-16mm zinc plated worm drive hose clip
  • Size: silicone blanking cap, 6mm (1/4") internal diameter, 13mm outside diameter, 3.5mm wall
  • Fitting: clean the pipe ends, push the part fully on and tighten one clip over each end; re-check once the engine has been up to temperature

Product details

BrandHOSES UK
MaterialSilicone
ColourRed
Length35mm
Temperature range-50°C TO +220°C
ShapeCircular
Pack quantity1
ManufacturerHOSES UK

Products related to this item