Silicone End Cap Blanking Bung 4mm (1/8") ID Red with 1 Hose Clip
Single 9.5-12mm Zinc Clamp | -50 to +220°C | 11mm OD | 3.5mm Wall | Unreinforced, Low Pressure | Race-Style Gloss
Brand: HOSES UK- -50°C TO +220°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- HOSES UK
- Material
- Silicone
- Colour
- Red
- Length
- 35mm
- Temperature range
- -50°C TO +220°C
About this item
- 📦 WHAT'S IN THE BOX – one silicone blanking cap, 4mm (1/8") internal diameter, 11mm outside diameter, plus one 9.5-12mm zinc plated worm drive hose clip: the cap and its clamp in one order.
- 🛑 BLOCKS OFF A 4mm PIPE – push the cap over a 4mm outside diameter pipe, spigot or port to blank off unused vacuum, breather, coolant and air spigots, or to seal a pipe end during repairs and testing. Unreinforced: for vacuum and low-pressure use.
- 🌡️ -50°C TO +220°C RATED – stays flexible in heat and cold, and resists ozone, UV and coolant so it won't harden or perish like ageing rubber.
- 🛡️ SOFT SILICONE, SAE J20 R3 – 3.5mm wall silicone that stays soft and sealing in the engine bay and resists ozone, UV and coolant.
- 🔩 MATCHED ZINC CLIP – one 9.5-12mm zinc plated worm drive hose clip sized for the 11mm outside diameter: push the cap fully on, slide the clip over it and tighten with a flat screwdriver or nut driver.
Product description
Silicone End Cap Blanking Bung 4mm (1/8") ID Red with 1 Hose Clip
A silicone blanking cap supplied with matching zinc plated worm drive hose clip, rated -50°C to +220°C. For air, water and coolant; not for fuel or oil.
- ✅ In the box: 1 x silicone blanking cap, 1 x 9.5-12mm zinc plated worm drive hose clip
- Size: silicone blanking cap, 4mm (1/8") internal diameter, 11mm outside diameter, 3.5mm wall
- Fitting: clean the pipe ends, push the part fully on and tighten one clip over each end; re-check once the engine has been up to temperature
Product details
| Brand | HOSES UK |
|---|---|
| Material | Silicone |
| Colour | Red |
| Length | 35mm |
| Temperature range | -50°C TO +220°C |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | HOSES UK |