Silicone Elbow Reducer 45 Degree 80-70mm Red, 2 Stainless T-Bolt Clamps
Clamp Ranges 86-91 & 80-85mm | 91/81mm OD | -50 to +250°C | 5.5mm Wall, 4 Ply | Angled Step Down | Race-Style Gloss
Brand: HOSES UK- 91mm OD
- 5.5mm wall · 4-ply
- -50°C TO +250°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit$26.00
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips$35.00
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers$73.00
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat$20.00
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
- Brand
- HOSES UK
- Material
- Silicone
- Colour
- Red
- Outside diameter
- 91mm
- Wall thickness
- 5.5mm
- Reinforcement
- 4-ply polyester
- Length
- 300mm
- Temperature range
- -50°C TO +250°C
- Maximum pressure
- 10 bar
About this item
- 📦 WHAT'S IN THE BOX – one red silicone 45 degree reducer elbow from 80mm to 70mm internal diameter, 91/81mm outside diameter, plus one 86-91mm and one 80-85mm stainless steel T-bolt clamp: the part and a T-bolt clamp for each end in one order.
- 🔧 45 DEGREE OFFSET + STEP DOWN – turns 45 degrees and steps a 80mm pipe down to 70mm in one moulded part, with 150mm legs to trim to fit. Match each internal diameter to the outside of the pipe it pushes over.
- 🌡️ -50°C TO +250°C RATED – silicone stays flexible next to a hot turbo and in cold weather; working pressure 3.3 bar, burst pressure 10 bar.
- 🛡️ 4-PLY POLYESTER REINFORCED, SAE J20 R3 – 4 layers of polyester fabric in the 5.5mm wall hold the shape under boost pressure and vacuum; silicone resists ozone, UV and ageing.
- 🔩 STAINLESS T-BOLT CLAMPS – one 86-91mm and one 80-85mm stainless steel T-bolt clamp, each sized so the 91/81mm outside diameter sits inside its clamping range. Full stainless W4 grade with a wide, smooth band and a T-bolt that pulls up evenly all the way round for a firm seal on boost and intercooler pipework.
Product description
Silicone Elbow Reducer 45 Degree 80-70mm Red, 2 Stainless T-Bolt Clamps
A silicone 45 degree reducer elbow from 80mm to 70mm internal diameter supplied with matching stainless steel T-bolt clamps, one for each end, rated -50°C to +250°C. T-bolt clamps give a stronger, more even grip than worm drive clips, so they suit turbo, intercooler and charge pipes where boost pressure can push a hose off. For air, water and coolant; not for fuel or oil.
- ✅ In the box: 1 x silicone 45 degree reducer elbow from 80mm to 70mm internal diameter, 1 x 86-91mm stainless steel T-bolt clamp, 1 x 80-85mm stainless steel T-bolt clamp
- Size: silicone 45 degree reducer elbow from 80mm to 70mm internal diameter, 91/81mm outside diameter, 5.5mm wall
- Construction: 4-ply polyester reinforced silicone, SAE J20 R3
- Pressure: 3.3 bar working, 10 bar burst
- Clamps: full stainless steel W4 grade band, bridge, T-bolt and nut; wide band with a smooth inner face that won't cut into silicone; uniform 360° clamping, DIN 3017
- How to measure: each clamp range is the outside diameter of the hose once it is pushed onto the pipe
- Fitting: clean the pipe ends, push the hose fully on, slip a clamp over each end about 5mm in from the edge and tighten the T-bolt evenly; re-check once the engine has been up to temperature
Product details
| Brand | HOSES UK |
|---|---|
| Material | Silicone |
| Colour | Red |
| Outside diameter | 91mm |
| Wall thickness | 5.5mm |
| Reinforcement | 4-ply polyester |
| Length | 300mm |
| Temperature range | -50°C TO +250°C |
| Maximum pressure | 10 bar |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | HOSES UK |