Propane Regulator for Calor 19kg 37mbar + 1m LPG Hose, Clips & Clip Driver
Pub & Restaurant Patio Heating | Bendy 7mm Clip Driver Included | Standard Replacement Length
Brand: HOSES UK- 8mm ID
- 15mm OD
- 3.5mm wall
- -20°C to +50°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- HOSES UK
- Material
- Polyvinyl Chloride Type I
- Colour
- Orange
- Inside diameter
- 8mm
- Outside diameter
- 15mm
- Wall thickness
- 3.5mm
- Length
- 1m
- Temperature range
- -20°C to +50°C
- Maximum pressure
- 37 millibars
About this item
- 📏 1M (3.3ft) HOSE KIT + CLIP DRIVER - 1 metre of 8mm bore orange LPG hose with the screw-on POL propane regulator and two worm drive hose clips, plus a 7mm hex flexible-shaft hose clip driver (235mm long, the shaft bends 90° to reach clips in tight spots, soft-grip handle). This length suits most gas BBQs, patio heaters and camping stoves as a like-for-like replacement
- 🔴 SCREW-ON POL PROPANE REGULATOR - Fixed 37mbar outlet with up to 1.5 kg/h flow and a 16 bar maximum inlet. The POL connection screws into the bottle valve (left-hand thread) and is tightened with a gas spanner for a firm, gas-tight seal
- 🛢️ MADE FOR THE CALOR 19KG PROPANE BOTTLE - Screws onto the red Calor 19kg propane cylinder's POL valve. The same regulator also fits Calor and Flogas 3.9kg to 47kg propane bottles, so it moves with you if you change bottle size
- 🔥 BUILT FOR 19KG BOTTLE JOBS - Ideal for pub and restaurant patio heaters, catering equipment and mobile food units. Push the hose onto the regulator's 8mm nozzle and the appliance inlet, tighten a clip over each end with the included flexible driver (its bendy shaft turns the 7mm clip screw where a straight screwdriver cannot reach) and the kit is ready to connect
- 🛡️ ITALIAN-MADE REGULATOR, EN 16129 - CE-marked IGT regulator made in Italy to EN 16129, assembled into this kit in the UK by HOSES UK. Works from -20°C to +50°C. Leak-check every joint with soapy water after fitting and replace the hose if it cracks, hardens or kinks.
Product description
37mbar screw-on propane regulator and 8mm hose kit that fits the Calor 19kg propane gas bottle, the popular mid-large red cylinder, complete with two securing clips.
A balanced choice for hospitality and home setups that need solid running time without the weight of a 47kg bottle.
- Fits Calor 19kg screw-on propane valves for a fast, secure hook-up
- Steady 37mbar output for patio heaters and catering equipment
- Easier to move and store than larger cylinders, with generous capacity
- Regulator, 8mm LPG hose and clips included
Also fits Flogas 19kg propane cylinders sharing the same screw-on connection.
🔧 Flexible Clip Driver Included: a 7mm hex nut driver for worm drive (jubilee) hose clips, 235mm long with a 135mm flexible shaft that bends up to 90° to reach clip screws behind appliances and inside cabinets, with a soft-grip handle.
📦 In the box: regulator, 1m of 8mm LPG hose, 2 hose clips and the flexible clip driver.
Product details
| Brand | HOSES UK |
|---|---|
| Material | Polyvinyl Chloride Type I |
| Colour | Orange |
| Inside diameter | 8mm |
| Outside diameter | 15mm |
| Wall thickness | 3.5mm |
| Length | 1m |
| Temperature range | -20°C to +50°C |
| Maximum pressure | 37 millibars |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | HOSES UK |