Propane Regulator for Calor 13kg 37mbar + 1m LPG Hose, Clips & Clip Driver
Home BBQ & Patio Heater Size | Bendy 7mm Clip Driver Included | Standard Replacement Length | Fits Red Bottles 3.9kg to 47kg
Brand: HOSES UK- 8mm ID
- 15mm OD
- 3.5mm wall
- -20°C to +50°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- HOSES UK
- Material
- Polyvinyl Chloride Type I
- Colour
- Orange
- Inside diameter
- 8mm
- Outside diameter
- 15mm
- Wall thickness
- 3.5mm
- Length
- 1m
- Temperature range
- -20°C to +50°C
- Maximum pressure
- 37 millibars
About this item
- 📏 1M (3.3ft) HOSE KIT + CLIP DRIVER - 1 metre of 8mm bore orange LPG hose with the screw-on POL propane regulator and two worm drive hose clips, plus a 7mm hex flexible-shaft hose clip driver (235mm long, the shaft bends 90° to reach clips in tight spots, soft-grip handle). This length suits most gas BBQs, patio heaters and camping stoves as a like-for-like replacement
- 🔴 SCREW-ON POL PROPANE REGULATOR - Fixed 37mbar outlet with up to 1.5 kg/h flow and a 16 bar maximum inlet. The POL connection screws into the bottle valve (left-hand thread) and is tightened with a gas spanner for a firm, gas-tight seal
- 🛢️ MADE FOR THE CALOR 13KG PROPANE BOTTLE - Screws onto the red Calor 13kg propane cylinder's POL valve. The same regulator also fits Calor and Flogas 3.9kg to 47kg propane bottles, so it moves with you if you change bottle size
- 🔥 BUILT FOR 13KG BOTTLE JOBS - Ideal for gas BBQs, patio heaters and home heating. Push the hose onto the regulator's 8mm nozzle and the appliance inlet, tighten a clip over each end with the included flexible driver (its bendy shaft turns the 7mm clip screw where a straight screwdriver cannot reach) and the kit is ready to connect
- 🛡️ ITALIAN-MADE REGULATOR, EN 16129 - CE-marked IGT regulator made in Italy to EN 16129, assembled into this kit in the UK by HOSES UK. Works from -20°C to +50°C. Leak-check every joint with soapy water after fitting and replace the hose if it cracks, hardens or kinks.
Product description
Complete 37mbar propane regulator kit that fits the Calor 13kg propane gas bottle, the everyday red cylinder, with an 8mm LPG hose and securing clips included.
The go-to all-rounder for gas BBQs, patio heaters and off-grid home cooking and heating.
- Fits Calor 13kg screw-on propane valves with a secure, no-fuss connection
- Reliable 37mbar regulated flow for cooking and heating appliances
- Popular domestic size - the right balance of capacity and portability
- Regulator, 8mm hose and clips supplied as a ready-to-use kit
Also compatible with Flogas 13kg propane cylinders using the same screw fitting.
🔧 Flexible Clip Driver Included: a 7mm hex nut driver for worm drive (jubilee) hose clips, 235mm long with a 135mm flexible shaft that bends up to 90° to reach clip screws behind appliances and inside cabinets, with a soft-grip handle.
📦 In the box: regulator, 1m of 8mm LPG hose, 2 hose clips and the flexible clip driver.
Product details
| Brand | HOSES UK |
|---|---|
| Material | Polyvinyl Chloride Type I |
| Colour | Orange |
| Inside diameter | 8mm |
| Outside diameter | 15mm |
| Wall thickness | 3.5mm |
| Length | 1m |
| Temperature range | -20°C to +50°C |
| Maximum pressure | 37 millibars |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | HOSES UK |