Gutter Vacuum Cleaning Kit 1200W 25L Wet & Dry Vac 7.5m Long Reach Poles
Suck and blow outlet | Ground-level operation, no ladders | 90/135/180 silicone bends | 51mm throughout | 10 clips + driver
Brand: AutoSiliconeHoses.comAsk about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit$26.00
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips$35.00
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers$73.00
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat$20.00
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- Aluminium
- Colour
- Black
About this item
- 🌪️ GUTTER VACUUM WITH SUCK AND BLOW - 1200W wet and dry vacuum clears soaked leaves, moss, silt and standing water on suction, then switches to the blow outlet to shift dry debris out of corners, valleys and downpipe entries a nozzle cannot reach. The same machine doubles as a workshop and garage vacuum for wet and dry clean-up between gutter jobs.
- 📏 7.5 METRE (25FT) LONG REACH FROM THE GROUND - Six 95cm aluminium extension poles plus a shorter section build up to 7.5m of working reach, so gutters, conservatory roofs and downpipe entries are cleared from ground level without ladders or roof access. Aluminium keeps the assembled pole run rigid overhead without becoming unmanageable to hold.
- 🔧 51MM SYSTEM WITH SILICONE BENDS AND A FULL CLIP SET - One 51mm connection size runs through the whole kit, so air loss at the joints stays low. Three silicone elbows at 90, 135 and 180 degrees let you set the working angle over straight runs, corners and offsets; a 51mm straight coupler, a 51mm aluminium connector and a 51mm to 49mm reducer, ten worm drive clips and a clip driver complete the assembly.
- 🛡️ 25 LITRE DRUM AND A CLEAR HOSE YOU CAN SEE THROUGH - The 25 litre wet and dry drum holds a useful load of gutter waste without the footprint of an industrial unit, and the 3 metre clear vacuum hose shows debris moving in real time so blockages are spotted before they build. Supplied with a UK mains plug and a full accessory kit.
- ⚫ SILICONE FITTINGS IN BLUE, RED OR BLACK - The bends and couplers are moulded in SAEJ20R3 silicone rated from -50C to +220C with a 3:1 safety factor, so they stay flexible through repeated assembly and hold their seal. Choose the colour that suits you; the vacuum itself is the same unit on every option.
Product description
Gutter Cleaning 1200W Suck & Blow Vacuum Kit is a ground-level gutter clearing system built around a 51mm connection size, combining lightweight aluminium extension poles with silicone bends and a modified 1200W wet & dry vacuum on a 25 litre drum.
- ✅ Clear gutters from the ground - 7.5 metres (25ft) of reach means no ladders and no roof access.
- ✅ Suck and blow - suction lifts wet leaves, moss and silt; the blow outlet clears dry debris from corners and valleys.
- ✅ One 51mm size throughout - consistent bore from nozzle to drum keeps air loss at the joints low.
- Set the working angle - silicone elbows at 90°, 135° and 180° position the nozzle over straight runs, corners and offsets.
- See the blockage - the 3 metre clear vacuum hose shows debris moving so you can act before it packs.
- Assembles securely - ten worm drive clips and a clip driver are supplied, so joints stay tight through repeated builds.
What is in the box
6 × 95cm aluminium extension poles plus 1 × shorter pole section
1 × aluminium slash-cut nozzle
3 × silicone elbows (90°, 135°, 180°)
1 × silicone straight coupler, 51mm ID
2 × aluminium connectors (51mm, and 51mm to 49mm)
10 × worm drive clips and 1 × worm clip driver
1 × modified 1200W wet & dry vacuum, 25 litre drum, UK plug
1 × clear vacuum hose, 3 metres
1 × full accessory kit
The aluminium pole sections give a rigid but manageable structure for overhead work across several joined lengths, while the silicone bends and couplers stay flexible through repeated adjustment and hold their seal. The silicone is SAEJ20R3 grade, rated -50°C to +220°C with a peak of +250°C and a 3:1 safety factor. The slash-cut aluminium nozzle concentrates airflow at the pick-up point, which is what lifts compacted moss and wet leaf litter rather than pushing it along.
On the blow setting the same motor delivers a stream of air that moves dry leaves, loose moss and dust out of valley junctions and tight corners, or loosens packed material so it can be collected on suction afterwards. Blow mode is equally useful in a workshop or garage for clearing floors and drying down panels.
Suited to houses, conservatories, light commercial buildings, workshops, garages and agricultural outbuildings. Typical jobs are clearing leaves, moss, silt and light debris from roof gutters and downpipe entry points, alongside general wet and dry clean-up. Supplied by Auto Silicone Hoses.
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | Aluminium |
| Colour | Black |
| Pack quantity | 1 |
| Manufacturer | Auto Silicone Hoses |