Fluoro Lined Silicone Fuel Hose 90 Degree Elbow 102mm ID with 2 Clips
Pair of 90-120 mm Stainless Clamps | Fits 102mm Spigot, 113mm OD | -50°C to +250°C | 5.5mm Wall | 90° Bend | Stealth OEM Look
Brand: AutoSiliconeHoses.com- 102mm ID
- 11.3cm OD
- 5.5mm wall · 4-ply
- -50°C to +250°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Colour
- Black
- Inside diameter
- 102mm
- Outside diameter
- 11.3cm
- Wall thickness
- 5.5mm
- Reinforcement
- 4-ply polyester
- Length
- 300mm
- Temperature range
- -50°C to +250°C
About this item
- 📦 WHAT'S IN THE BOX – one 90 degree fluoro lined silicone elbow, 102mm (4") ID x 113mm OD, 5.5mm wall, 150mm legs, plus two 90-120mm stainless steel worm drive hose clips: the elbow and both clamps for the job in one order.
- 🌡️ RATED -50°C TO +250°C – operating range -50°C to +250°C. Rated 2.8 bar working / 8.5 bar burst.
- 🔧 MADE FOR THE JOB – suits crankcase breather, catch-can, oil vapour and fuel lines on cars, vans, motorbikes and track cars.
- 🛡️ BUILT TO LAST – fluorosilicone inner liner for fuel and oil; 4-ply polyester reinforced; made to SAE J30 R6.
- 🔩 MATCHED STAINLESS CLIPS – the 90-120mm stainless steel worm drive hose clips are sized for the 113mm outside diameter, so they close down tight with a flat screwdriver and will not rust. ⚫ Black elbow.
Product description
Fluoro Lined Silicone Fuel Hose 90 Degree Elbow 102mm ID with 2 Clips
Supplied with two matching stainless steel worm drive hose clips sized for the 113mm outside diameter, for crankcase breather, catch-can, oil vapour and fuel lines on cars, vans, motorbikes and track cars.
- ✅ In the box: one 90 degree fluoro lined silicone elbow, 102mm (4") ID x 113mm OD, 5.5mm wall, 150mm legs and 2 x 90-120mm stainless steel worm drive hose clips
- Temperature: -50°C to +250°C
- Pressure: 2.8 bar working / 8.5 bar burst
- Clips: 90-120mm range, sized for the 113mm outside diameter
Fitting tip: push the hose fully over the pipe or spigot and fit a clip over each end, tightening evenly.
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Colour | Black |
| Inside diameter | 102mm |
| Outside diameter | 11.3cm |
| Wall thickness | 5.5mm |
| Reinforcement | 4-ply polyester |
| Length | 300mm |
| Temperature range | -50°C to +250°C |
| Pack quantity | 1 |
| Manufacturer | Auto Silicone Hoses |