Fluoro Lined Fuel & Oil 45 Degree Elbow 63mm ID with 2 Hose Clips

50°C to +250°C | Pair of 60-80mm Stainless Clamps | 74mm OD | Gentle 45° Turn | 300mm Legs | 5.5mm 4 Ply Wall | 12 Bar Burst

Brand: HOSES UK
  • 63mm ID
  • 74mm OD
  • 5.5mm wall
  • -50°C TO +250°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£5795

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
HOSES UK
Material
Fluorosilicone, Silicone
Colour
Black
Inside diameter
63mm
Outside diameter
74mm
Wall thickness
5.5mm
Length
600mm
Temperature range
-50°C TO +250°C
Maximum pressure
4 bar

About this item

  • 📦 IN THE BOX – one 63mm (2 1/2") bore black fluorosilicone lined silicone fuel & oil hose, 45 degree elbow with 300mm legs, plus two 60-80mm stainless steel worm drive hose clips sized for its 74mm outside diameter.
  • 🛡️ FLUOROSILICONE LINED, SAE J30 R6 – a fluorosilicone inner liner carries petrol, diesel and engine oil inside a 5.5mm 4 ply polyester reinforced silicone wall. 63mm ID, 74mm OD.
  • 🌡️ -50°C TO +250°C OPERATING RANGE – 4 bar working and 12 bar burst at this bore.
  • 🔧 FOR FUEL, OIL AND VAPOUR – fuel feed and return lines, crankcase breather and catch can hoses, PCV lines and turbo oil feed and drain pipework on cars, vans, motorbikes and track cars. Trim either leg to fit.
  • 🔩 MATCHED STAINLESS CLIPS – the 60-80mm worm drive clips put the 74mm OD in the upper half of their range, so they slide on and still close down tight. Push the hose fully over the pipe and tighten a clip over each end.

Product description

Fluoro Lined Fuel & Oil 45 Degree Elbow 63mm ID with 2 Hose Clips

  • In the box: 63mm (2 1/2") bore black fluorosilicone lined silicone fuel & oil hose, 45 degree elbow with 300mm legs and 2 x 60-80mm stainless steel worm drive hose clips
  • A fluorosilicone inner liner carries petrol, diesel and engine oil inside a 5.5mm 4 ply polyester reinforced silicone wall. 63mm ID, 74mm OD.
  • 4 bar working and 12 bar burst at this bore.
  • Fuel feed and return lines, crankcase breather and catch can hoses, PCV lines and turbo oil feed and drain pipework on cars, vans, motorbikes and track cars. Trim either leg to fit.
  • Fitting: the clips are sized for the 74mm outside diameter. Re-check them once the engine has been up to temperature.

Product details

BrandHOSES UK
MaterialFluorosilicone, Silicone
ColourBlack
Inside diameter63mm
Outside diameter74mm
Wall thickness5.5mm
Length600mm
Temperature range-50°C TO +250°C
Maximum pressure4 bar
ShapeRound
Pack quantity1
ManufacturerHOSES UK

Products related to this item