Fluoro Lined Fuel & Oil 45 Degree Elbow 35mm ID with 2 Hose Clips
50°C to +250°C | Pair of 35-50mm Stainless Clamps | 44mm OD | Gentle 45° Turn | 300mm Legs | 4.5mm 3 Ply Wall | 15 Bar Burst
Brand: HOSES UK- 35mm ID
- 44mm OD
- 4.5mm wall
- -50°C TO +250°C
Ask about this product
£3245
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- HOSES UK
- Material
- Fluorosilicone, Silicone
- Colour
- Black
- Inside diameter
- 35mm
- Outside diameter
- 44mm
- Wall thickness
- 4.5mm
- Length
- 600mm
- Temperature range
- -50°C TO +250°C
- Maximum pressure
- 5 bar
About this item
- 📦 IN THE BOX – one 35mm (1 3/8") bore black fluorosilicone lined silicone fuel & oil hose, 45 degree elbow with 300mm legs, plus two 35-50mm stainless steel worm drive hose clips sized for its 44mm outside diameter.
- 🛡️ FLUOROSILICONE LINED, SAE J30 R6 – a fluorosilicone inner liner carries petrol, diesel and engine oil inside a 4.5mm 3 ply polyester reinforced silicone wall. 35mm ID, 44mm OD.
- 🌡️ -50°C TO +250°C OPERATING RANGE – 5 bar working and 15 bar burst at this bore.
- 🔧 FOR FUEL, OIL AND VAPOUR – fuel feed and return lines, crankcase breather and catch can hoses, PCV lines and turbo oil feed and drain pipework on cars, vans, motorbikes and track cars. Trim either leg to fit.
- 🔩 MATCHED STAINLESS CLIPS – the 35-50mm worm drive clips put the 44mm OD in the upper half of their range, so they slide on and still close down tight. Push the hose fully over the pipe and tighten a clip over each end.
Product description
Fluoro Lined Fuel & Oil 45 Degree Elbow 35mm ID with 2 Hose Clips
- In the box: 35mm (1 3/8") bore black fluorosilicone lined silicone fuel & oil hose, 45 degree elbow with 300mm legs and 2 x 35-50mm stainless steel worm drive hose clips
- A fluorosilicone inner liner carries petrol, diesel and engine oil inside a 4.5mm 3 ply polyester reinforced silicone wall. 35mm ID, 44mm OD.
- 5 bar working and 15 bar burst at this bore.
- Fuel feed and return lines, crankcase breather and catch can hoses, PCV lines and turbo oil feed and drain pipework on cars, vans, motorbikes and track cars. Trim either leg to fit.
- Fitting: the clips are sized for the 44mm outside diameter. Re-check them once the engine has been up to temperature.
Product details
| Brand | HOSES UK |
|---|---|
| Material | Fluorosilicone, Silicone |
| Colour | Black |
| Inside diameter | 35mm |
| Outside diameter | 44mm |
| Wall thickness | 4.5mm |
| Length | 600mm |
| Temperature range | -50°C TO +250°C |
| Maximum pressure | 5 bar |
| Shape | Round |
| Pack quantity | 1 |
| Manufacturer | HOSES UK |
£32.45