Flexible Shaft 7mm Driver + 50 Stainless Worm Drive Clips 9.5-12mm
Bends 90° for Tight Spots | W4 304 Grade Band | Fits 9.5 to 12 mm OD | 50 Pieces + 270 mm Tool
Brand: AutoSiliconeHoses.com- 12mm ID
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- Stainless Steel
- Colour
- Silver
- Inside diameter
- 12mm
About this item
- IN THE BAG: 50 x 9.5-12mm W4 304 stainless steel worm drive hose clips plus 1 x 7mm flexible shaft hose clip driver, 270mm overall length
- FLEXIBLE SHAFT DRIVER: the shaft bends to give 90° access, reaching clip screws behind pipework and in tight or awkward spaces where a straight screwdriver cannot go
- 7MM HEX SOCKET: matches the 7mm hex screw on every clip in the bag, so it grips the head instead of slipping out of the slot like a flat blade; ergonomic soft grip non-slip handle
- W4 304 STAINLESS STEEL WORM DRIVE CLIPS: W4 grade stainless band and housing for automotive, industrial, DIY and marine hose work; clamping range 9.5-12mm - measure the hose outside diameter and make sure it sits inside this range
- APPLICATIONS: automotive, industrial, DIY and marine hose work - coolant, air, fuel and water hoses on rubber, silicone and PVC hose
Product description
WHAT IS IN THE BAG: 50 x 9.5-12mm W4 304 stainless steel worm drive hose clips and 1 x 7mm flexible shaft hose clip driver, supplied together in one bag.
THE CLIPS: DIN 3017 worm drive hose clips with a 12mm wide, 0.8mm thick W4 304 stainless steel band and a 7mm slotted hex screw. Clamping range 9.5mm to 12mm. Working temperature -40°C to +180°C, peak +190°C. W4 304 stainless steel resists corrosion, so these clips suit fuel, marine, outdoor water and pond hoses as well as coolant and air lines.
THE DRIVER: 7mm hex socket that fits over the clip screw head, so it grips instead of slipping out of the slot like a flat blade screwdriver. 270mm overall length with a soft grip handle. The flexible shaft bends to about 90 degrees, so it reaches clip screws behind pipework and in tight engine bays where a straight screwdriver cannot go.
HOW TO CHOOSE THE SIZE: measure the outside diameter (OD) of the hose where the clip will sit, with the hose pushed onto its pipe or spigot. Use callipers, or wrap a strip of paper round the hose, mark the overlap and divide that length by 3.14. This clip fits a hose OD from 9.5mm to 12mm; for the firmest hold pick a size where your measurement sits in the middle of the range.
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | Stainless Steel |
| Colour | Silver |
| Inside diameter | 12mm |
| Shape | Circular |
| Pack quantity | 51 |
| Manufacturer | Auto Silicone Hoses |