DPF Pressure Sensor Hose Repair Kit, 6mm & 8mm Hoses 1m Each + Clips
20°C to +85°C (+100°C Peak) | 16 Bar Working, 48 Bar Burst | Trim to Length
Brand: AutoSiliconeHoses.com- 8mm ID
- 13mm OD
- 2.5 millimetres wall
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- Rubber
- Colour
- Black
- Inside diameter
- 8mm
- Outside diameter
- 13mm
- Wall thickness
- 2.5 millimetres
- Length
- 2m
- Maximum pressure
- 16 bar
About this item
- 🔧 Extended Length for Flexible Repairs – Longer 1 metre hoses allow greater routing options for complex engine bays and custom setups
- 📏 Two Common Sizes – One 6mm ID and one 8mm ID hose, 1 metre each, covering the larger-bore DPF pressure lines used on many diesel cars and vans
- 🧵 Durable Cotton-Braided Reinforcement – Strong yet flexible construction resists wear, kinking, and damage from heat and movement
- 🔩 Complete Replacement Kit – Supplied with 6mm & 8mm hoses and 4 stainless steel clamps for secure, reliable connections
- ⚠️ Heat Guidance – Avoid direct contact with hot exhaust/DPF components; reroute or shield where required (use silicone/PTFE for high heat zones)
Product description
DPF Pressure Sensor Repair Hose Set designed to replace damaged, split or perished hoses between the Diesel Particulate Filter and differential pressure sensor.
Kit contents: 1x 6mm ID hose (1 metre), 1x 8mm ID hose (1 metre), 4x stainless steel mini hose clips. Cut each hose to the length your vehicle needs.
Hose sizes: 6mm ID x 11mm OD and 8mm ID x 13mm OD, 2.5mm wall. Working pressure 16 bar, burst pressure 48 bar.
Operating temperature range: -20°C to +85°C continuous, short-term peaks to +100°C.
Important: these hoses are not suitable for direct contact with the exhaust system or DPF body. Always route away from high-temperature components and use clips or heat shielding where required. For sustained extreme heat, silicone or PTFE hose is recommended.
- 🔧 Extended Length for Flexible Repairs – Longer 1 metre hoses allow greater routing options for complex engine bays and custom setups
- 📏 Two Common Sizes – One 6mm ID and one 8mm ID hose, 1 metre each, covering the larger-bore DPF pressure lines used on many diesel cars and vans
- 🧵 Durable Cotton-Braided Reinforcement – Strong yet flexible construction resists wear, kinking, and damage from heat and movement
- 🔩 Complete Replacement Kit – Supplied with 6mm & 8mm hoses and 4 stainless steel clamps for secure, reliable connections
- ⚠️ Heat Guidance – Avoid direct contact with hot exhaust/DPF components; reroute or shield where required (use silicone/PTFE for high heat zones)
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | Rubber |
| Colour | Black |
| Inside diameter | 8mm |
| Outside diameter | 13mm |
| Wall thickness | 2.5 millimetres |
| Length | 2m |
| Maximum pressure | 16 bar |
| Pack quantity | 6 |
| Manufacturer | Auto Silicone Hoses |