Diesel Heater Duct Hose with Clips 80mm x 2m Black Silicone
Pair of 70-90 mm Zinc Clamps | Fits 80mm Spigot, 85mm OD | Camper Warm Air | -70°C to +310°C | 6.6ft Length
Brand: AutoSiliconeHoses.com- 80mm ID
- 85mm OD
- 2.5mm wall · 2-ply
- -70°C to +310°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- Silicone
- Colour
- Black
- Inside diameter
- 80mm
- Outside diameter
- 85mm
- Wall thickness
- 2.5mm
- Reinforcement
- 2-ply polyester
- Length
- 2m
- Temperature range
- -70°C to +310°C
About this item
- 📦 WHAT'S IN THE BOX – one continuous 2 metres (6.6ft) length of silicone ducting hose, 80mm (3 1/8 inch) ID x 85mm OD, 2.5mm wall, plus two 70-90mm zinc plated worm drive hose clips: the hose and both clamps for the job in one order.
- 🌡️ RATED -70°C TO +310°C – operating range -70°C to +310°C with peaks to +350°C.
- 🔧 MADE FOR THE JOB – suits diesel night heater, cab and camper warm-air ducting and engine air feeds.
- 🛡️ BUILT TO LAST – 2-ply polyester reinforced; flexible silicone ducting for hot air feeds.
- 🔩 MATCHED ZINC CLIPS – the 70-90mm zinc plated worm drive hose clips are sized for the 85mm outside diameter, so they close down tight with a flat screwdriver.
Product description
Diesel Heater Duct Hose with Clips 80mm x 2m Black Silicone
Supplied with two matching zinc plated worm drive hose clips sized for the 85mm outside diameter, for diesel night heater, cab and camper warm-air ducting and engine air feeds.
- ✅ In the box: one continuous 2 metres (6.6ft) length of silicone ducting hose, 80mm (3 1/8 inch) ID x 85mm OD, 2.5mm wall and 2 x 70-90mm zinc plated worm drive hose clips
- Temperature: -70°C to +310°C, peaks to +350°C
- Clips: 70-90mm range, sized for the 85mm outside diameter
Fitting tip: push the hose fully over the pipe or spigot and fit a clip over each end, tightening evenly.
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | Silicone |
| Colour | Black |
| Inside diameter | 80mm |
| Outside diameter | 85mm |
| Wall thickness | 2.5mm |
| Reinforcement | 2-ply polyester |
| Length | 2m |
| Temperature range | -70°C to +310°C |
| Pack quantity | 1 |
| Manufacturer | Auto Silicone Hoses |