Clear PVC Suction Hose 51mm (2"), Wire Reinforced Vacuum Pipe 35m
10°C to +65°C (Peak 70°C) | 114.8ft Near-Full Coil | 65mm Outside Diameter, 3.5mm Wall | 3 Bar Working/9 Burst | Smooth Bore
Brand: HOSES UK- 51mm ID
- 3.5mm wall
- -10°C to +65°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit$26.00
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips$35.00
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers$73.00
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat$20.00
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
- Brand
- HOSES UK
- Material
- Polyvinyl Chloride (PVC)
- Colour
- Clear
- Inside diameter
- 51mm
- Wall thickness
- 3.5mm
- Length
- 35m
- Temperature range
- -10°C to +65°C
- Maximum pressure
- 3 bar
About this item
- 📏 51mm (2") BORE x 35M LONG - 51mm Inside Diameter x 65mm Outside Diameter (OD) with a 3.5mm wall, 35 metre (114.8 ft) length. Fits 51mm / 2" hose tails, barbs and spigots.
- 🌀 BUILT FOR SUCTION & VACUUM - Spiral steel reinforcement holds the bore open so it will not collapse on the suction side of a pump or vacuum. At 51mm bore it suits sump and submersible pump discharge, dewatering, pool and pond draining, and workshop extraction.
- 🔍 CLEAR PVC WITH STEEL WIRE HELIX - A galvanised steel wire spiral moulded into flexible clear PVC resists kinking and crushing, and you can see exactly what is being drawn through and where a blockage sits. This 35m length is close to a full coil, for the longest runs with the fewest joins.
- 💪 3 BAR WORKING PRESSURE - 9 bar burst (3:1 safety factor) at 51mm bore, minimum bend radius 348mm. Rated -10°C to +65°C (peak +70°C) for year-round indoor and outdoor use.
- 🔧 EASY TO FIT - Cuts cleanly with a sharp knife or pipe cutter. Warm the end in hot water to ease it onto a tight fitting, then secure with a hose clip whose range covers 65mm. For water, air and light non-oily chemicals; not for petrol, diesel, solvents or steam.
Product description
Clear Suction & Vacuum Hose - 51mm (2") x 65mm, 35m
Flexible, transparent PVC hose reinforced with a galvanised steel wire helix. Spiral steel reinforcement holds the bore open so it will not collapse on the suction side of a pump or vacuum. The smooth bore keeps flow efficient and you can see exactly what is being drawn through and where a blockage sits.
- ✅ This size: 51mm Inside Diameter, 65mm Outside Diameter (OD), 3.5mm wall, 35m long.
- ✅ Pressure: 3 bar working, 9 bar burst (3:1 safety factor).
- Bend radius: 348mm minimum - keep suction runs straight and supported.
- Temperature: -10°C to +65°C (peak +70°C).
- Media: water, air and light non-oily chemicals. Not for petrol, diesel, solvents or steam.
Applications: Sump and submersible pump discharge, dewatering, pool and pond draining, and workshop extraction, plus general fluid transfer in the garden, workshop and on the farm.
Fitting: match the hose bore to your hose tail or barb (51mm / 2"), warm the end in hot water to ease it on, then secure with a hose clip that covers 65mm.
Also available: 10 x 16mm, 13 x 19mm, 16 x 22mm, 19 x 26mm, 25 x 33mm, 32 x 42mm, 38 x 49mm, 51 x 65mm bores, in lengths from 0.5m to 50m, with or without hose clips.
Product details
| Brand | HOSES UK |
|---|---|
| Material | Polyvinyl Chloride (PVC) |
| Colour | Clear |
| Inside diameter | 51mm |
| Wall thickness | 3.5mm |
| Length | 35m |
| Temperature range | -10°C to +65°C |
| Maximum pressure | 3 bar |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | HOSES UK |