Bilge Pump Hose 19mm (3/4") x 1m, Blue + 2 Stainless Hose Clips
Boat & marine discharge line | Fits 19mm outlet spigots, 23mm OD | 18-25mm clamps | -10°C to +65°C
Brand: AutoSiliconeHoses.com- 19mm ID
- 23mm OD
- -10°C to +65°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit$26.00
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips$35.00
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers$73.00
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat$20.00
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- Polyvinyl Chloride (PVC)
- Colour
- Blue
- Inside diameter
- 19mm
- Outside diameter
- 23mm
- Length
- 1m
- Temperature range
- -10°C to +65°C
- Maximum pressure
- 5 bar
About this item
- ⚓ BILGE PUMP HOSE KIT - one 1 metre length of 19mm (3/4") ID x 23mm OD blue corrugated PVC hose plus two 18-25mm stainless steel worm drive hose clips, to run a bilge pump outlet to a skin fitting or overboard.
- 🔧 PUSH-ON FIT - slides over a 19mm (3/4") bilge pump outlet and skin fitting spigot; tighten a stainless clip at each end. Cut to the length you need with a sharp knife.
- 💪 SMOOTH BORE, CRUSH RESISTANT - the smooth inner wall gives the pump full flow, and the spiral rib holds the bore open round tight bends in a hull, engine bay or cockpit locker.
- 👁️ SEE THE FLOW - clear PVC wall with a blue rib, so you can see whether the pump is moving water or has lost its prime.
- 🛡️ STAINLESS CLIPS, UV RESISTANT PVC - stainless steel worm drive clips for wet and salty conditions; PVC hose rated -10°C to +65°C, 5 bar working. For bilge water discharge only: not for fuel, oil, drinking water or exhaust.
Product description
Blue Bilge Pump Hose Kit, 19mm x 1m with 2 Stainless Hose Clips - crush-resistant corrugated PVC hose and two stainless worm drive clips to plumb a bilge pump outlet on a boat, dinghy, narrowboat or kayak.
- ✅ Complete kit - hose plus 2 x 18-25mm stainless clips.
- ✅ Smooth bore - full flow from the pump.
- Crush resistant - spiral rib keeps the bore open on bends.
This kit: 1m of 19mm (3/4") ID, 23mm OD hose, 5 bar working pressure, -10°C to +65°C.
For bilge water discharge only. Not for fuel, oil, drinking water or exhaust.
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | Polyvinyl Chloride (PVC) |
| Colour | Blue |
| Inside diameter | 19mm |
| Outside diameter | 23mm |
| Length | 1m |
| Temperature range | -10°C to +65°C |
| Maximum pressure | 5 bar |
| Shape | Round |
| Pack quantity | 1 |
| Manufacturer | Auto Silicone Hoses |