19mm OD x 50mm Beaded Aluminium Hose Joiner + 2 Worm Drive Clips Silver

1 Fitting + 2 Clamps | 5cm Long | Inline Repair | Zinc Clamps 22-30 mm | Suits 19 mm ID | -40°C to +220°C | 15.8mm ID

Brand: AutoSiliconeHoses.com
  • 19mm ID
  • 19mm OD
  • 1.6mm wall
  • -40°C to +220°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£1545

Price includes VAT

Colour: Silver
Pack Size: Single
Size: 19mm OD x 50mm
How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

Not sure of your size? Hose size guide ›

Brand
AutoSiliconeHoses.com
Material
Aluminium
Colour
Silver
Inside diameter
19mm
Outside diameter
19mm
Wall thickness
1.6mm
Temperature range
-40°C to +220°C

About this item

  • 🚀 Joins boost, intercooler, turbo and intake pipework; the swaged bead at each end stops the hose slipping off under pressure
  • 📏 19mm (3/4 inch) outside diameter, 15.8mm inside, 50mm long; push your hose over each end up to the bead
  • 🧱 Precision-made from T6063 aluminium with a 1.6mm wall: light, strong and corrosion resistant
  • 🔩 CLIPS INCLUDED - includes 2 x zinc plated worm drive clips, 22-30mm, one for each hose end. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip tightens from 30mm down to 22mm, sized for 19mm ID silicone hose with a 4-4.5mm wall (hose OD about 27-28mm); it suits a hose wall of about 1.5-5.5mm. Tighten with a screwdriver for an even, leak-free grip.
  • 📦 THIS KIT: 1 x 19mm OD x 50mm aluminium hose joiner + 2 x 22-30mm zinc plated worm drive clips - for turbo, intercooler, intake and coolant hose runs.

Product description

Beaded Aluminium Hose Joiner with Worm Drive Clips - this kit includes 1 x 19mm OD x 50mm aluminium hose joiner and 2 x 22-30mm zinc plated worm drive hose clips, so everything needed for the joint arrives together.

  • Joins boost, intercooler, turbo and intake pipework; the swaged bead at each end stops the hose slipping off under pressure
  • 19mm (3/4 inch) outside diameter, 15.8mm inside, 50mm long; push your hose over each end up to the bead
  • Precision-made from T6063 aluminium with a 1.6mm wall: light, strong and corrosion resistant
  • CLIPS INCLUDED - includes 2 x zinc plated worm drive clips, 22-30mm, one for each hose end. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip tightens from 30mm down to 22mm, sized for 19mm ID silicone hose with a 4-4.5mm wall (hose OD about 27-28mm); it suits a hose wall of about 1.5-5.5mm. Tighten with a screwdriver for an even, leak-free grip.
  • THIS KIT: 1 x 19mm OD x 50mm aluminium hose joiner + 2 x 22-30mm zinc plated worm drive clips - for turbo, intercooler, intake and coolant hose runs.

In the box: 1 x 19mm OD x 50mm aluminium hose joiner, 2 x zinc plated worm drive clips, 22-30mm, one for each hose end.

Fitting: push each hose fully over the fitting (past the bead where there is one), slide a clip over each hose end and tighten it with a screwdriver.

Product details

BrandAutoSiliconeHoses.com
MaterialAluminium
ColourSilver
Inside diameter19mm
Outside diameter19mm
Wall thickness1.6mm
Temperature range-40°C to +220°C
Pack quantity1
ManufacturerAuto Silicone Hoses

Products related to this item