9mm Rubber Fuel Pipe 4m with 2 Stainless Hose Clips, Cotton Overbraid
20°C to +85°C (+100°C Peak) | Pair of 13-15mm Clamps | 13.1ft Tank-to-Engine Runs | 14mm Outer, 16/48 Bar Work/Burst
Brand: AP Automotive- 9mm ID
- 14mm OD
- 2.5mm wall
- -20°C TO +85°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AP Automotive
- Material
- Rubber, Cotton
- Colour
- Black
- Inside diameter
- 9mm
- Outside diameter
- 14mm
- Wall thickness
- 2.5mm
- Length
- 4m
- Temperature range
- -20°C TO +85°C
- Maximum pressure
- 16 bar
About this item
- 📦 HOSE + 2 CLIPS – one continuous 4 metre length (13.1ft) of 9mm (23/64") bore cotton braided rubber hose, 9mm internal diameter, 14mm outside diameter and 2.5mm wall, plus two 13-15mm stainless steel mini hose clips: everything needed for a tank-to-engine run or a couple of lines.
- ⛽ COTTON OVERBRAID FUEL HOSE – a traditional rubber fuel pipe for petrol, diesel and oil lines. The 9mm bore suits main fuel feed, oil feed and crankcase breather lines on cars, vans, tractors, plant and classic vehicles.
- 🛡️ OIL-RESISTANT RUBBER, COTTON OVERBRAID – a smooth black oil-resistant synthetic rubber inner tube for petrol, diesel, engine oil and lubricants, wrapped in a high-tensile cotton overbraid that adds abrasion protection and the traditional braided look of classic and vintage vehicles. Made to DIN 73379 Type B.
- 🌡️ -20°C TO +85°C RATED – works continuously from -20°C to +85°C with peaks to +100°C. Rated 16 bar working and 48 bar burst pressure (3:1 safety factor). Route it away from exhaust manifolds and other direct heat.
- 🔩 MATCHED STAINLESS CLIPS – the 13-15mm mini clips are sized for the 14mm outside diameter. Trim the hose square with a sharp blade, push it fully over the pipe and tighten a clip over each end.
Product description
Rubber Cotton Overbraid Fuel Hose with 2 Stainless Steel Hose Clips – 9mm (23/64") ID x 14mm OD, 4 Metres
A flexible, oil-resistant fuel and oil hose: a smooth black synthetic rubber inner tube for petrol, diesel, engine oil and lubricants, reinforced with a high-tensile cotton overbraid for strength, abrasion protection and the distinctive traditional finish that suits classic, vintage and restoration work as well as everyday repairs.
- ✅ In the box: 4m of 9mm bore hose and 2 x 13-15mm stainless steel mini hose clips
- ✅ Size: 9mm internal diameter, 14mm outside diameter, 2.5mm wall, 4 metre length (13.1ft)
- ✅ Temperature: -20°C to +85°C continuous, peaks to +100°C
- Pressure: 16 bar working, 48 bar burst (3:1 safety factor)
- Construction: oil-resistant synthetic rubber tube, high-tensile cotton overbraid
- Standard: DIN 73379 Type B
- Media: petrol, diesel, engine oil, lubricating oil and related hydrocarbons
Applications: main fuel feed, oil feed and crankcase breather lines on cars, vans, tractors, plant and classic vehicles; fuel lines, oil transfer, lubrication systems and low-to-medium pressure petroleum lines on vehicles, boats, agricultural and light industrial machinery. Cut square to length and secure each end with the two 13-15mm clips supplied; keep the hose away from exhaust manifolds and other direct heat.
Product details
| Brand | AP Automotive |
|---|---|
| Material | Rubber, Cotton |
| Colour | Black |
| Inside diameter | 9mm |
| Outside diameter | 14mm |
| Wall thickness | 2.5mm |
| Length | 4m |
| Temperature range | -20°C TO +85°C |
| Maximum pressure | 16 bar |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | AP Automotive |