90mm x 25mm Aluminium T Piece + 3 Worm Drive Clips Silver

1 Fitting + 3 Clamps | Three Way Split | Zinc Clamps 85-100 & 25-35 mm | Suits 90 mm ID | -40°C to +220°C | 86.8mm ID

Brand: AutoSiliconeHoses.com
  • 90mm ID
  • 90mm OD
  • 1.6mm wall
  • -40°C to +220°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£2195

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
AutoSiliconeHoses.com
Material
Aluminium
Colour
Silver
Inside diameter
90mm
Outside diameter
90mm
Wall thickness
1.6mm
Temperature range
-40°C to +220°C

About this item

  • 🔀 Splits one pipe run into two, or brings two together: coolant routing, intercooler, turbo and intake pipework
  • 📏 90mm (3 1/2 inch) main body OD (86.8mm inside), 102mm long, with a 25mm OD side spout
  • 🧱 T6063 aluminium with a 1.6mm wall and a smooth bore; swaged / beaded ends help stop hoses blowing off
  • 🔩 CLIPS INCLUDED - includes 3 x zinc plated worm drive clips: 2 x 85-100mm for the 90mm main run and 1 x 25-35mm for the 25mm outlet. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Sized for silicone hose with a 4-4.5mm wall pushed over each end: the 85-100mm clips suit a 90mm ID hose (wall about 0.5-5mm), the 25-35mm clip suits a 25mm ID hose (wall about 0.5-5mm). Tighten with a screwdriver for an even, leak-free grip.
  • 📦 THIS KIT: 1 x 90mm OD x 25mm Outlet aluminium T piece + 2 x 85-100mm + 1 x 25-35mm zinc plated worm drive clips - for turbo, intercooler, intake and coolant hose runs.

Product description

Aluminium T Piece Hose Connector with Worm Drive Clips - this kit includes 1 x 90mm OD x 25mm Outlet aluminium T piece and 2 x 85-100mm + 1 x 25-35mm zinc plated worm drive hose clips, so everything needed for the joint arrives together.

  • Splits one pipe run into two, or brings two together: coolant routing, intercooler, turbo and intake pipework
  • 90mm (3 1/2 inch) main body OD (86.8mm inside), 102mm long, with a 25mm OD side spout
  • T6063 aluminium with a 1.6mm wall and a smooth bore; swaged / beaded ends help stop hoses blowing off
  • CLIPS INCLUDED - includes 3 x zinc plated worm drive clips: 2 x 85-100mm for the 90mm main run and 1 x 25-35mm for the 25mm outlet. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Sized for silicone hose with a 4-4.5mm wall pushed over each end: the 85-100mm clips suit a 90mm ID hose (wall about 0.5-5mm), the 25-35mm clip suits a 25mm ID hose (wall about 0.5-5mm). Tighten with a screwdriver for an even, leak-free grip.
  • THIS KIT: 1 x 90mm OD x 25mm Outlet aluminium T piece + 2 x 85-100mm + 1 x 25-35mm zinc plated worm drive clips - for turbo, intercooler, intake and coolant hose runs.

In the box: 1 x 90mm OD x 25mm Outlet aluminium T piece, 3 x zinc plated worm drive clips: 2 x 85-100mm for the 90mm main run and 1 x 25-35mm for the 25mm outlet.

Fitting: push each hose fully over the fitting (past the bead where there is one), slide a clip over each hose end and tighten it with a screwdriver.

Product details

BrandAutoSiliconeHoses.com
MaterialAluminium
ColourSilver
Inside diameter90mm
Outside diameter90mm
Wall thickness1.6mm
Temperature range-40°C to +220°C
Pack quantity1
ManufacturerAuto Silicone Hoses

Products related to this item