90 Degree Silicone Reducer Elbow 38-25mm Black + 2 Stainless T-Bolt Clamps
Clamp Ranges 44-47 & 32-35mm | 47/34mm OD | -50 to +250°C | 4.5mm Wall, 3 Ply | Right-Angle Step Down | OEM-Style Gloss
Brand: AP Automotive- 47mm OD
- 4.5mm wall · 3-ply
- -50°C TO +250°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AP Automotive
- Material
- Silicone
- Colour
- Black
- Outside diameter
- 47mm
- Wall thickness
- 4.5mm
- Reinforcement
- 3-ply polyester
- Length
- 300mm
- Temperature range
- -50°C TO +250°C
About this item
- 📦 WHAT'S IN THE BOX – one black silicone 90 degree reducer elbow from 38mm to 25mm internal diameter, 47/34mm outside diameter, plus one 44-47mm and one 32-35mm stainless steel T-bolt clamp: the part and a T-bolt clamp for each end in one order.
- 🔧 JOINS TWO PIPE SIZES – steps a 38mm pipe down to 25mm and turns the run through 90 degrees in one moulded part, with 150mm legs. Match each internal diameter to the outside of the pipe it pushes over.
- 🌡️ -50°C TO +250°C RATED – silicone stays flexible next to a hot turbo and in cold weather.
- 🛡️ 3-PLY POLYESTER REINFORCED – 3 layers of polyester fabric in the 4.5mm wall hold the shape under boost pressure and vacuum; silicone resists ozone, UV and ageing.
- 🔩 STAINLESS T-BOLT CLAMPS – one 44-47mm and one 32-35mm stainless steel T-bolt clamp, each sized so the 47/34mm outside diameter sits inside its clamping range. Full stainless W4 grade with a wide, smooth band and a T-bolt that pulls up evenly all the way round for a firm seal on boost and intercooler pipework.
Product description
90 Degree Silicone Reducer Elbow 38-25mm Black + 2 Stainless T-Bolt Clamps
A silicone 90 degree reducer elbow from 38mm to 25mm internal diameter supplied with matching stainless steel T-bolt clamps, one for each end, rated -50°C to +250°C. T-bolt clamps give a stronger, more even grip than worm drive clips, so they suit turbo, intercooler and charge pipes where boost pressure can push a hose off. For air, water and coolant; not for fuel or oil.
- ✅ In the box: 1 x silicone 90 degree reducer elbow from 38mm to 25mm internal diameter, 1 x 44-47mm stainless steel T-bolt clamp, 1 x 32-35mm stainless steel T-bolt clamp
- Size: silicone 90 degree reducer elbow from 38mm to 25mm internal diameter, 47/34mm outside diameter, 4.5mm wall
- Construction: 3-ply polyester reinforced silicone
- Clamps: full stainless steel W4 grade band, bridge, T-bolt and nut; wide band with a smooth inner face that won't cut into silicone; uniform 360° clamping, DIN 3017
- How to measure: each clamp range is the outside diameter of the hose once it is pushed onto the pipe
- Fitting: clean the pipe ends, push the hose fully on, slip a clamp over each end about 5mm in from the edge and tighten the T-bolt evenly; re-check once the engine has been up to temperature
Product details
| Brand | AP Automotive |
|---|---|
| Material | Silicone |
| Colour | Black |
| Outside diameter | 47mm |
| Wall thickness | 4.5mm |
| Reinforcement | 3-ply polyester |
| Length | 300mm |
| Temperature range | -50°C TO +250°C |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | AP Automotive |