90 Degree Silicone Elbow Reducer 60mm to 45mm Red with 2 Hose Clips

60-80mm & 45-60mm Zinc Clamps | -50 to +250°C | 71/54mm OD | 5.5mm Wall, 4 Ply | Tight Turn + Step Down | Race-Style Gloss

Brand: HOSES UK
  • 71mm OD
  • 5.5mm wall · 4-ply
  • -50°C TO +250°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£2395

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
HOSES UK
Material
Silicone
Colour
Red
Outside diameter
71mm
Wall thickness
5.5mm
Reinforcement
4-ply polyester
Length
300mm
Temperature range
-50°C TO +250°C
Maximum pressure
12.5 bar

About this item

  • 📦 WHAT'S IN THE BOX – one 90 degree reducing elbow from 60mm to 45mm internal diameter, 71/54mm outside diameter, plus one 60-80mm and one 45-60mm zinc plated worm drive hose clip: the part and a clamp for each end in one order.
  • 🔧 JOINS TWO SIZES – steps a 60mm pipe down to 45mm and turns the run through 90 degrees, for turbo, intercooler, intake and coolant pipework. Match each internal diameter to the outside of the pipe it pushes over. For air, water and coolant; not for fuel or oil.
  • 🌡️ -50°C TO +250°C RATED – stays flexible in heat and cold; 4.2 bar working, 12.5 bar burst, and resists ozone, UV and coolant so it won't harden or perish like ageing rubber.
  • 🛡️ 4-PLY POLYESTER REINFORCED, SAE J20 R3 – 4 layers of polyester fabric in the 5.5mm wall hold the shape under boost pressure and vacuum, with a smooth bore for clean flow.
  • 🔩 MATCHED ZINC CLIPS – one 60-80mm and one 45-60mm zinc plated worm drive hose clip sized for the 71/54mm outside diameter: push the part fully on, slide the clip over it and tighten with a flat screwdriver or nut driver.

Product description

90 Degree Silicone Elbow Reducer 60mm to 45mm Red with 2 Hose Clips

A 90 degree reducing elbow from 60mm to 45mm internal diameter supplied with matching zinc plated worm drive hose clips, rated -50°C to +250°C. For air, water and coolant; not for fuel or oil.

  • ✅ In the box: 1 x 90 degree reducing elbow from 60mm to 45mm internal diameter, 1 x 60-80mm zinc plated worm drive hose clip, 1 x 45-60mm zinc plated worm drive hose clip
  • Size: 90 degree reducing elbow from 60mm to 45mm internal diameter, 71/54mm outside diameter, 5.5mm wall
  • Construction: 4-ply polyester reinforced silicone, SAE J20 R3
  • Pressure: 4.2 bar working, 12.5 bar burst
  • Fitting: clean the pipe ends, push the part fully on and tighten one clip over each end; re-check once the engine has been up to temperature

Product details

BrandHOSES UK
MaterialSilicone
ColourRed
Outside diameter71mm
Wall thickness5.5mm
Reinforcement4-ply polyester
Length300mm
Temperature range-50°C TO +250°C
Maximum pressure12.5 bar
ShapeCircular
Pack quantity1
ManufacturerHOSES UK

Products related to this item