90 Degree Silicone Elbow Hose 25mm (1") ID Blue with 2 Hose Clips

Pair of 25-35mm Zinc Clamps | -50 to +250°C | 34mm OD | 4.5mm Wall, 3 Ply | 150mm Legs | Right-Angle Turns | Show-Car Gloss

Brand: AutoSiliconeHoses.com
  • 25mm ID
  • 34mm OD
  • 4.5mm wall
  • -50°C TO +250°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£1495

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
AutoSiliconeHoses.com
Material
Silicone
Colour
Blue
Inside diameter
25mm
Outside diameter
34mm
Wall thickness
4.5mm
Length
300mm
Temperature range
-50°C TO +250°C
Maximum pressure
16 bar

About this item

  • 📦 WHAT'S IN THE BOX – one 90 degree silicone elbow, 25mm (1") internal diameter x 34mm outside diameter with 150mm on each leg, plus two 25-35mm zinc plated worm drive hose clips: the bend and a clamp for each end in one order.
  • 🔧 90 DEGREE BEND – a moulded 90 degree elbow makes a tight right-angle turn without the kinking you get from bending straight hose. Typical uses at this size: heater matrix feeds and returns, expansion tank and overflow pipes, and small radiator and water pump hoses. For air, water and coolant; not for fuel or oil.
  • 🌡️ -50°C TO +250°C RATED – rated -50°C to +250°C, so it copes with the heat of the cooling, heater and intake circuits; working pressure 5.5 bar, burst pressure 16 bar, bend radius 30mm.
  • 🛡️ 3 PLY POLYESTER REINFORCED – SAE J20 R3 – smooth silicone with 3 layers of polyester fabric in the 4.5mm wall, so it holds its shape under pressure and resists ozone, UV light, weathering and ageing.
  • 🔩 MATCHED ZINC CLIPS – the two 25-35mm W1 zinc plated worm drive clips are sized for the 34mm outside diameter: push each leg fully onto its pipe, slide a clip over the end and tighten with a flat screwdriver or nut driver.

Product description

90 Degree Silicone Elbow Hose 25mm (1") ID Blue with 2 Hose Clips

A moulded 90 degree silicone elbow supplied with two matching zinc plated worm drive hose clips. 3 ply polyester reinforced silicone for air, water and coolant (not fuel or oil), rated -50°C to +250°C.

  • ✅ In the box: 1 x 90 degree silicone elbow 25mm ID and 2 x 25-35mm zinc plated worm drive hose clips
  • Size: 25mm ID (1"), 4.5mm wall, 34mm outside diameter, 150mm each leg
  • Pressure: 5.5 bar working, 16 bar burst
  • Bend radius: 30mm
  • Standard: SAE J20 R3
  • Typical uses: heater matrix feeds and returns, expansion tank and overflow pipes, and small radiator and water pump hoses
  • Fitting: push each leg fully onto the pipe and tighten one clip over each end; re-check once the engine has been up to temperature

Product details

BrandAutoSiliconeHoses.com
MaterialSilicone
ColourBlue
Inside diameter25mm
Outside diameter34mm
Wall thickness4.5mm
Length300mm
Temperature range-50°C TO +250°C
Maximum pressure16 bar
ShapeCircular
Pack quantity1
ManufacturerAuto Silicone Hoses

Products related to this item