13mm 90 Degree Hose Elbow Joiner + 2 Worm Drive Clips Black
3D printed ABS, made in the UK | Zinc plated steel clamps included | Ribbed barbs for a secure grip | 40mm insert each leg
Brand: AutoSiliconeHoses.com- 13mm ID
- 13mm OD
- 2mm wall
- -20°C to +105°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit$26.00
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips$35.00
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers$73.00
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat$20.00
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- Acrylonitrile Butadiene Styrene (ABS)
- Colour
- Black
- Inside diameter
- 13mm
- Outside diameter
- 13mm
- Wall thickness
- 2mm
- Temperature range
- -20°C to +105°C
About this item
- 🔧 90 DEGREE HOSE ELBOW - joins two hoses of the same internal diameter at a 90 degree angle. Push one end into each hose and secure with the worm drive clips included for a tight, leak-free bend without kinking the hose.
- 🛡️ RIBBED BARBS FOR A SECURE FIT - raised barbs on both legs grip the inside of the hose, so it holds firm under clips. Each leg has a 40mm insertable length. Suits rubber, silicone and PVC hoses.
- 💪 TOUGH ABS PLASTIC - 3D printed in the UK from impact-resistant ABS with a matte finish. Lightweight, rigid and rated from -20°C to +105°C.
- 🔩 CLIPS INCLUDED - includes 2 x zinc plated worm drive clips, 16-22mm, one for each hose end. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip tightens from 22mm down to 16mm, to suit a 13mm ID hose with a wall of about 1.5-4.5mm. Tighten with a screwdriver for an even, leak-free grip.
- ⚫ THIS KIT: 1 x 13mm black 90 degree elbow joiner + 2 x 16-22mm zinc plated worm drive clips - for pond pumps and filters, water butts, garden irrigation, swimming pools, aquariums, drainage and automotive coolant, vacuum and breather lines.
Product description
90 Degree Hose Elbow Joiner with Worm Drive Clips - this kit includes 1 x 13mm black 90 degree elbow joiner and 2 x 16-22mm zinc plated worm drive hose clips, so everything needed for the joint arrives together.
- 90 DEGREE HOSE ELBOW - joins two hoses of the same internal diameter at a 90 degree angle. Push one end into each hose and secure with the worm drive clips included for a tight, leak-free bend without kinking the hose.
- RIBBED BARBS FOR A SECURE FIT - raised barbs on both legs grip the inside of the hose, so it holds firm under clips. Each leg has a 40mm insertable length. Suits rubber, silicone and PVC hoses.
- TOUGH ABS PLASTIC - 3D printed in the UK from impact-resistant ABS with a matte finish. Lightweight, rigid and rated from -20°C to +105°C.
- CLIPS INCLUDED - includes 2 x zinc plated worm drive clips, 16-22mm, one for each hose end. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip tightens from 22mm down to 16mm, to suit a 13mm ID hose with a wall of about 1.5-4.5mm. Tighten with a screwdriver for an even, leak-free grip.
- THIS KIT: 1 x 13mm black 90 degree elbow joiner + 2 x 16-22mm zinc plated worm drive clips - for pond pumps and filters, water butts, garden irrigation, swimming pools, aquariums, drainage and automotive coolant, vacuum and breather lines.
Fitting: measure the internal diameter of each hose, fit each hose fully onto the fitting, slide a clip over each hose end and tighten it with a screwdriver.
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Colour | Black |
| Inside diameter | 13mm |
| Outside diameter | 13mm |
| Wall thickness | 2mm |
| Temperature range | -20°C to +105°C |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | Auto Silicone Hoses |