8mm (5/16") ID Rubber Airline Hose with 2 Hose Clips, Compressor 20 Bar 2m

Pair of 11-16mm Zinc Clamps | -20°C to +80°C (+85°C Peak) | 6.6ft Length | 15mm OD, 3mm Wall

Brand: AP Automotive
  • 8mm ID
  • 15mm OD
  • 3mm wall
  • -20°C to +80°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£995

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
AP Automotive
Material
PVC Nitrile Rubber Blend
Colour
Black
Inside diameter
8mm
Outside diameter
15mm
Wall thickness
3mm
Length
2m
Temperature range
-20°C to +80°C
Maximum pressure
20 bar

About this item

  • 📦 WHAT'S IN THE BOX – one continuous 2 metres (6.6ft) of 8mm (5/16") bore rubber air line hose, 15mm outside diameter and 3mm wall, plus two 11-16mm zinc plated worm drive hose clips to secure it to your hose tails or air line fittings.
  • 💨 RATED FOR WORKSHOP AIR – rated 20 bar working pressure with a 60 bar burst pressure (3:1 safety factor). The 8mm bore suits impact wrenches, spray guns, tyre inflators and general workshop air tools.
  • 🛡️ REINFORCED RUBBER CONSTRUCTION – black PVC and nitrile rubber blend inner tube and cover with triple polyester yarn reinforcement, a smooth bore for low pressure loss and a tough outer cover that resists abrasion, oil mist and ozone.
  • 🌡️ -20°C TO +80°C RATED – stays flexible from -20°C to +80°C with peaks to +85°C, lies flat and coils easily. 74mm minimum bend radius. Made to ISO 5774:2016 Type B and BS5118/2.
  • 🔩 MATCHED ZINC CLIPS – the 11-16mm W1 zinc plated worm drive clips are sized for the 15mm outside diameter. Trim the hose square, push it fully onto the tail, slide a clip over each end and tighten with a flat screwdriver or nut driver.

Product description

8mm (5/16") ID Rubber Airline Hose with 2 Hose Clips, Compressor 20 Bar 2m

A reinforced rubber air line hose for compressors, pneumatic tools and workshop air systems, supplied with two matching zinc plated worm drive hose clips sized for its 15mm outside diameter.

  • ✅ In the box: 2m of 8mm bore rubber air line hose and 2 x 11-16mm zinc plated worm drive hose clips
  • Size: 8mm (5/16") internal diameter, 15mm outside diameter, 3mm wall, 2 metre length (6.6ft)
  • Pressure: 20 bar working, 60 bar burst (3:1 safety factor)
  • Temperature: -20°C to +80°C, peaks to +85°C
  • Bend radius: 74mm minimum
  • Standards: ISO 5774:2016 Type B, BS5118/2
  • Cut square to length, push onto the hose tails and secure each end with one of the two clips supplied

Product details

BrandAP Automotive
MaterialPVC Nitrile Rubber Blend
ColourBlack
Inside diameter8mm
Outside diameter15mm
Wall thickness3mm
Length2m
Temperature range-20°C to +80°C
Maximum pressure20 bar
ShapeCircular
Pack quantity1
ManufacturerAP Automotive

Products related to this item