7mm Rubber Fuel Pipe 8m with 2 Stainless Hose Clips, Cotton Overbraid
20°C to +85°C (+100°C Peak) | Pair of 11-13mm Clamps | 26.2ft Workshop Stock, Several Jobs | 16/48 Bar Work/Burst
Brand: AP Automotive- 7mm ID
- 12mm OD
- 2.5mm wall
- -20°C TO +85°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AP Automotive
- Material
- Rubber, Cotton
- Colour
- Black
- Inside diameter
- 7mm
- Outside diameter
- 12mm
- Wall thickness
- 2.5mm
- Length
- 8m
- Temperature range
- -20°C TO +85°C
- Maximum pressure
- 16 bar
About this item
- 📦 HOSE + 2 CLIPS – one continuous 8 metre length (26.2ft) of 7mm (9/32") bore cotton braided rubber hose, 7mm internal diameter, 12mm outside diameter and 2.5mm wall, plus two 11-13mm stainless steel mini hose clips: everything needed for workshop stock covering several jobs.
- ⛽ COTTON OVERBRAID FUEL HOSE – a traditional rubber fuel pipe for petrol, diesel and oil lines. The 7mm bore suits fuel feed and return lines on cars, motorbikes, quads, outboards, generators and garden machinery.
- 🛡️ OIL-RESISTANT RUBBER, COTTON OVERBRAID – a smooth black oil-resistant synthetic rubber inner tube for petrol, diesel, engine oil and lubricants, wrapped in a high-tensile cotton overbraid that adds abrasion protection and the traditional braided look of classic and vintage vehicles. Made to DIN 73379 Type B.
- 🌡️ -20°C TO +85°C RATED – works continuously from -20°C to +85°C with peaks to +100°C. Rated 16 bar working and 48 bar burst pressure (3:1 safety factor), with a 72mm minimum bend radius. Route it away from exhaust manifolds and other direct heat.
- 🔩 MATCHED STAINLESS CLIPS – the 11-13mm mini clips are sized for the 12mm outside diameter. Trim the hose square with a sharp blade, push it fully over the pipe and tighten a clip over each end.
Product description
Rubber Cotton Overbraid Fuel Hose with 2 Stainless Steel Hose Clips – 7mm (9/32") ID x 12mm OD, 8 Metres
A flexible, oil-resistant fuel and oil hose: a smooth black synthetic rubber inner tube for petrol, diesel, engine oil and lubricants, reinforced with a high-tensile cotton overbraid for strength, abrasion protection and the distinctive traditional finish that suits classic, vintage and restoration work as well as everyday repairs.
- ✅ In the box: 8m of 7mm bore hose and 2 x 11-13mm stainless steel mini hose clips
- ✅ Size: 7mm internal diameter, 12mm outside diameter, 2.5mm wall, 8 metre length (26.2ft)
- ✅ Temperature: -20°C to +85°C continuous, peaks to +100°C
- Pressure: 16 bar working, 48 bar burst (3:1 safety factor)
- Bend radius: 72mm minimum
- Construction: oil-resistant synthetic rubber tube, high-tensile cotton overbraid
- Standard: DIN 73379 Type B
- Media: petrol, diesel, engine oil, lubricating oil and related hydrocarbons
Applications: fuel feed and return lines on cars, motorbikes, quads, outboards, generators and garden machinery; fuel lines, oil transfer, lubrication systems and low-to-medium pressure petroleum lines on vehicles, boats, agricultural and light industrial machinery. Cut square to length and secure each end with the two 11-13mm clips supplied; keep the hose away from exhaust manifolds and other direct heat.
Product details
| Brand | AP Automotive |
|---|---|
| Material | Rubber, Cotton |
| Colour | Black |
| Inside diameter | 7mm |
| Outside diameter | 12mm |
| Wall thickness | 2.5mm |
| Length | 8m |
| Temperature range | -20°C TO +85°C |
| Maximum pressure | 16 bar |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | AP Automotive |