Flexible Shaft 7mm Clip Driver + 1 Zinc Worm Drive Hose Clip 9.5-12mm

Bends 90° for Tight Spots | W1 Plated Steel Band | Fits 9.5 to 12 mm OD | 1 Piece + 270 mm Tool

Brand: AutoSiliconeHoses.com
  • 12mm ID

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£1500

Price includes VAT

Colour: Silver
set_name: 1 Clip + Flexible Shaft Driver
Size: 9.5mm - 12mm
How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

Not sure of your size? Hose size guide ›

Brand
AutoSiliconeHoses.com
Material
Zinc
Colour
Silver
Inside diameter
12mm

About this item

  • IN THE BAG: 1 x 9.5-12mm zinc plated W1 worm drive hose clip plus 1 x 7mm flexible shaft hose clip driver, 270mm overall length
  • FLEXIBLE SHAFT DRIVER: the shaft bends to give 90° access, reaching clip screws behind pipework and in tight or awkward spaces where a straight screwdriver cannot go
  • 7MM HEX SOCKET: matches the 7mm hex screw on every clip in the bag, so it grips the head instead of slipping out of the slot like a flat blade; ergonomic soft grip non-slip handle
  • ZINC PLATED W1 WORM DRIVE CLIPS: continuously threaded band with a smooth inner profile and rolled edges, suits rubber and silicone hoses; clamping range 9.5-12mm - measure the hose outside diameter and make sure it sits inside this range
  • APPLICATIONS: automotive, industrial and DIY hose work in dry and under-bonnet locations - radiator, coolant, heater, air intake, breather and vacuum hoses on rubber, silicone and PVC hose

Product description

WHAT IS IN THE BAG: 1 x 9.5-12mm W1 zinc plated steel worm drive hose clip and 1 x 7mm flexible shaft hose clip driver, supplied together in one bag.

THE CLIP: DIN 3017 worm drive hose clip with a 12mm wide, 0.8mm thick W1 zinc plated steel band and a 7mm slotted hex screw. Clamping range 9.5mm to 12mm. Working temperature -40°C to +180°C, peak +190°C. Zinc plated W1 clips are for dry and under-bonnet lines such as radiator, coolant, heater, air intake and vacuum hoses.

THE DRIVER: 7mm hex socket that fits over the clip screw head, so it grips instead of slipping out of the slot like a flat blade screwdriver. 270mm overall length with a soft grip handle. The flexible shaft bends to about 90 degrees, so it reaches clip screws behind pipework and in tight engine bays where a straight screwdriver cannot go.

HOW TO CHOOSE THE SIZE: measure the outside diameter (OD) of the hose where the clip will sit, with the hose pushed onto its pipe or spigot. Use callipers, or wrap a strip of paper round the hose, mark the overlap and divide that length by 3.14. This clip fits a hose OD from 9.5mm to 12mm; for the firmest hold pick a size where your measurement sits in the middle of the range.

Product details

BrandAutoSiliconeHoses.com
MaterialZinc
ColourSilver
Inside diameter12mm
ShapeCircular
Pack quantity2
ManufacturerAuto Silicone Hoses

Products related to this item